Hi all,
I have a new carp setup that somehow just won't work.
The two machines are Jetway mini-itx J7F4 machines, dual Gb LAN. dmesg
below.
Details from the master:
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:a3:19:ce
groups: egress
media: Ethernet 100baseTX full-duplex
status: active
inet6 fe80::230:18ff:fea3:19ce%re0 prefixlen 64 scopeid 0x1
inet 192.168.2.11 netmask 0xffffff00 broadcast 192.168.2.255
carp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:03
carp: MASTER carpdev re0 vhid 3 advbase 1 advskew 0
groups: carp
inet6 fe80::200:5eff:fe00:103%carp0 prefixlen 64 scopeid 0x6
inet 192.168.2.13 netmask 0xffffff00 broadcast 192.168.2.255
/etc/hostname.re0:
inet 192.168.2.11 255.255.255.0 NONE media 100BaseTX mediaopt full-duplex
/etc/hostname.carp0:
inet 192.168.2.13 255.255.255.0 192.168.2.255 vhid 3 pass carpnuldrie
carpdev re0
Details from the backup:
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:b0:27:7d
groups: egress
media: Ethernet 100baseTX full-duplex
status: active
inet6 fe80::230:18ff:feb0:277d%re0 prefixlen 64 scopeid 0x1
inet 192.168.2.10 netmask 0xffffff00 broadcast 192.168.2.255
carp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:03
carp: MASTER carpdev re0 vhid 3 advbase 1 advskew 100
groups: carp
inet6 fe80::200:5eff:fe00:103%carp0 prefixlen 64 scopeid 0x6
inet 192.168.2.13 netmask 0xffffff00 broadcast 192.168.2.255
/etc/hostname.re0:
inet 192.168.2.10 255.255.255.0 NONE media 100BaseTX mediaopt full-duplex
/etc/hostname.carp0:
inet 192.168.2.13 255.255.255.0 192.168.2.255 vhid 3 pass carpnuldrie
advskew 100 carpdev re0
pf is now off on both machines, just in case. Both machines think they're
master, since no carp traffic _other than their own_ is visible on the re0
interface. I've checked with `tcpdump -ni re0` on both machines. No other
carped hosts in the house.
The machines are currently connected to a cheap a$$ switch, but wouldn't
work on a well configured HP 2624 either.
I'd be grateful for any and all pointers! Let me know if I forgot to
provide any details.
TIA... Nico
The dmesg of the master (backup is identical, btw):
OpenBSD 4.1-stable (GENERIC) #5: Sun Jul 15 18:00:11 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA real mem = 518549504 (506396K)
avail mem = 465399808 (454492K)
using 4278 buffers containing 26050560 bytes (25440K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/01/07, BIOS32 rev. 0 @ 0xf9410,
SMBIOS rev. 2.3 @ 0xf0000 (33 entries) apm0 at bios0: Power Management
spec V1.2 apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb8e4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb820/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01:
aperture at 0xf4000000, size 0x10000000 wsdisplay0 at vga1 mux 1: console
(80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100
emulation) re0 at pci0 dev 9 function 0 "Realtek 8169SC" rev 0x10:
RTL8169/8110SC (0x1800), irq 10, address 00:30:18:a3:19:ce rgephy0 at re0
phy 7: RTL8169S/8110S PHY, rev. 2 re1 at pci0 dev 11 function 0 "Realtek
8169SC" rev 0x10: RTL8169/8110SC (0x1800), irq 5, address
00:30:18:a3:19:cf rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt wd0 at pciide0 channel 0
drive 0: <WDC WD800JD-75MSA3> wd0: 16-sector PIO, LBA48, 76293MB,
156250000 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility pciide1: channel 0 disabled (no drives) pciide1: channel 1
ignored (disabled) uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev
0x81: irq 9 usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ff45 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
