On Saturday, August 18, 2007 at 18:35:37 +0300, Timo Myyrd wrote:
>Maurice Janssen wrote:
>>If there's no output at all, then you might have the wrong serial cable
>>(there are quite a few types of serial null-modem cables) or the Soekris
>>is dead. You should at least see the Soekris powering up, counting
>>memory and so on. I suggest to get this part working first.
>>
>Any suggestions on how? I have Belkin null-modem serial cable which I
>bought from the same place as that soekris so it would be quite silly
>for a european soekris distributor to sell a null modem cables that
>won't work with soekrises.
OK, should be fine then. How do you make the connection? I use
something like:
soekris|For hp300,i386,mac68k,macppc,mvmeppc,vax:\
:dv=/dev/tty00:tc=direct:tc=unixhost:
in /etc/remote and 'tip soekris' to connect to it.
>Should Soekrisises error led lit up if there would be some problem or
>something. Now the only light that stays on is the 'power'.
On the 4501, it's on when you turn it on and it goes off during the
POST.
Maurice
