Well...
I guess I'm the unluckiest man on earth:
Aug 28 21:55:59 van-fw1 /bsd: msk3: watchdog timeout
Aug 28 21:56:00 van-fw1 /bsd: msk2: phy failed to come ready
Aug 28 21:56:31 van-fw1 last message repeated 77 times
Aug 28 21:58:32 van-fw1 last message repeated 297 times
Aug 28 22:00:00 van-fw1 last message repeated 215 times
This is a pretty staple Dell 1750, with two extra dual-port syskonnects.
The card simply doesn't change it's state to "active" when I plugged in
the cable. After I rebooted, the card came up alright, but this behavior
worries me.
BTW... this problem happened in another Dell 1750 with the same cards
using just a GENERIC kernel.
In the past 6 months, I've had problems with em, bge, and msk cards...
hehehe... Is there any other gigabit card out there I can fuck up? hehehe
Thanks all.
# dmesg
OpenBSD 4.1-stable (GENERIC.MP) #0: Mon Aug 27 11:04:17 UTC 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.79 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2146889728 (2096572K)
avail mem = 1952116736 (1906364K)
using 4278 buffers containing 107466752 bytes (104948K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 01/13/04, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xfb320 (56 entries)
bios0: Dell Computer Corporation PowerEdge 1750
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc4a0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x2200
0xcb800/0x1800 0xec000/0x4000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.0 interface BT iobase 0xe4/3 spacing 1 irq 10
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.79 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec02000, version 11, 16 pins
ioapic2: misconfigured as apic 0, remapped to apid 10
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb1 bus 1
mskc0 at pci1 dev 4 function 0 "Schneider & Koch SK-9Sxx" rev 0x12,
Yukon-2 XL rev. A1 (0x1): apic 9 int 4 (irq 7)
msk0 at mskc0 port A, address 00:00:5a:72:cb:f9
eephy0 at msk0 phy 0: Marvell 88E1112 Gigabit PHY, rev. 1
msk1 at mskc0 port B, address 00:00:5a:72:cb:fa
eephy1 at msk1 phy 0: Marvell 88E1112 Gigabit PHY, rev. 1
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci2 at pchb2 bus 3
mskc1 at pci2 dev 6 function 0 "Schneider & Koch SK-9Sxx" rev 0x12,
Yukon-2 XL rev. A1 (0x1): apic 9 int 8 (irq 5)
msk2 at mskc1 port A, address 00:00:5a:72:cc:0b
eephy2 at msk2 phy 0: Marvell 88E1112 Gigabit PHY, rev. 1
msk3 at mskc1 port B, address 00:00:5a:72:cc:0c
eephy3 at msk3 phy 0: Marvell 88E1112 Gigabit PHY, rev. 1
vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMBus
disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N103> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
apic 8 int 11 (irq 11), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
pci3 at pchb4 bus 2
bge0 at pci3 dev 0 function 0 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): apic 9 int 0 (irq 5), address 00:0f:1f:64:89:94
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): apic 9 int 1 (irq 7), address 00:0f:1f:64:89:95
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pchb5 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb6 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci4 at pchb6 bus 4
ami0 at pci4 dev 3 function 0 "Dell PERC 4/Di Verde" rev 0x02: apic 9
int 2 (irq 7)
ami0: Dell 14a, 32b, FW 412W, BIOS vH406, 128MB RAM
ami0: 2 channels, 0 FC loops, 1 logical drives
scsibus1 at ami0: 40 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec total
scsibus2 at ami0: 16 targets
safte0 at scsibus2 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 1.1> SCSI2
3/processor fixed
scsibus3 at ami0: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pctr: user-level cycle counter enabled
uhub1 at uhub0 port 3
uhub1: NEC product 0x0059, rev 2.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
