hello misc@
I took the time to install OpenBSD -current on a new computer I just built
It does not see 4GB of memory out of the box, is there something I
have to compile in the kernel to get this to work?
The motherboard is an Asus Striker Extreme it has 4 1GB memory
modules, and an intel Quad Core cpu
below is a dmesg
OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3488116736 (3326MB)
avail mem = 3384631296 (3227MB)
User Kernel Config
UKC> enable acpi
398 acpi0 enabled
UKC> disable apm
307 apm0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/06/07, BIOS32 rev. 0 @
0xf1e30, SMBIOS rev. 2.4 @ 0xf0000 (77 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS StrikerExtreme
ACPI BIOS Revision 1301" date 07/06/2007
bios0: ASUSTeK Computer INC. StrikerExtreme
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd964
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd810/336 (19 entries)
pcibios0: PCI Exclusive IRQs: 5 7 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xce00 0xd0000/0x4000!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP HPET MCFG APIC
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 3 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (HUB0)
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpibtn at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA C55 Host" rev 0xa2
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 2 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 3 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 4 not configured
"NVIDIA C55 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 6 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 7 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 0 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 2 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 3 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 4 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 5 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 6 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 0 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 2 not configured
ppb0 at pci0 dev 3 function 0 "NVIDIA C55 PCIE" rev 0xa1
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP55 ISA" rev 0xa2
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2d: W83791D
adt0 at iic1 addr 0x2e: adt7475 rev 0x69
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP55 USB" rev 0xa1: apic 4
int 7 (irq 7), version 1.0, legacy support
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic 4
int 5 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide1: using apic 4 int 5 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160815AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <ST3160815AS>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 14 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide2: using apic 4 int 10 (irq 10) for native-PCI interrupt
pciide3 at pci0 dev 14 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide3: using apic 4 int 11 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide3 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW AW-G170S, 1.72> SCSI0
5/cdrom removable
cd0(pciide3:0:0): using PIO mode 4
atapiscsi1 at pciide3 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <SONY, DVD RW AW-G170S, 1.72> SCSI0
5/cdrom removable
cd1(pciide3:1:0): using PIO mode 4
ppb1 at pci0 dev 15 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
ral0 at pci2 dev 7 function 0 "Ralink RT2661" rev 0x00: apic 4 int 11
(irq 11), address 00:0e:2e:99:e4:dc
ral0: MAC/BBP RT2661D, RF RT2529 (MIMO XR)
"VIA VT6306 FireWire" rev 0xc0 at pci2 dev 11 function 0 not configured
azalia0 at pci0 dev 15 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2:
apic 4 int 5 (irq 5)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices/0x198b (rev. 3.0), HDA version 1.0
audio0 at azalia0
nfe0 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int
11 (irq 11), address 00:1a:92:c0:d4:b2
eephy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
nfe1 at pci0 dev 18 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int
7 (irq 7), address 00:1a:92:c0:df:70
eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
ppb2 at pci0 dev 22 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci3 at ppb2 bus 3
sili0 at pci3 dev 0 function 0 "CMD Technology SiI3132 SATA" rev 0x01:
apic 4 int 7 (irq 7)
scsibus2 at sili0: 2 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
uhidev1: 4 report ids
ums0 at uhidev1 reportid 1: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=3, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
ugen0 at uhub1 port 8
ugen0: Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
Generic Serial (PROTOTYPE--Remember to change idVendor), rev
2.00/0.90, addr 3
San Fourman Jr.
