Hi,

Not sure if I am missing something, most likely it's not implemented yet, but I was looking to see if I could check anything about a RAID 1 setup on Sun X4100 M2 so that it can be monitor somehow. I am not making progress on it however.

I assume it does work and OpenBSD can use it no problem, I mean the RAID setup, not controlling it or getting feedback from it.

The best I get is:

# bioctl sd0
sd0: <LSILOGIC, Logical Volume, 3000>, serial

Nothing else that I tried produce anything, except errors, or nothing at all.

However the above command does produce this:

Sep 7 01:52:24 www2 /bsd: sd0(mpi0:2:0): Check Condition (error 0x70) on opcode 0x12
Sep  7 01:52:24 www2 /bsd:     SENSE KEY: Illegal Request
Sep  7 01:52:24 www2 /bsd:          INFO: 0x7689dc0 (VALID flag off)
Sep  7 01:52:24 www2 /bsd:      ASC/ASCQ: Illegal Field in CDB

Each time it is executed.

There isn't any problem to do setup like this is it? OpenBSD will use the RAID and not crash running it right?

I did the upgrade for the latest ILOM as well as the Symbios Logic SAS1064 SAS controller just in case to:

Sun(TM) Integrated Lights Out Manager

Version 1.1.8

AND

SAS1064 to 1.16.40.00-IR

Looks like it's running, but not being next to the servers and pulling drives to see if that affect the OpenBSD operation or not, doesn't help. SO, I was hopping for some bioctl, or something else may be.

Any suggestions?

This is on 4.2 GENERIC-MP with ACPI enable and the RAID is done with two SAS drives of 73GB, you only see one in the dmesg as the RAID 1. This box also have 8GB, but only use less then 4 obviously. Hopefully that's not a problem to leave it there until may be one day being supported. That's the safest place not to loose these. (;>

Thanks

Daniel

=======================================================================
OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT 2007
    [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3757625344 (3583MB)
avail mem = 3635965952 (3467MB)
User Kernel Config
UKC> enable acpi
266 acpi0 enabled
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfbd50 (70 entries)
bios0: vendor American Megatrends Inc. version "0ABJX039" date 04/11/2007
bios0: Sun Microsystems Sun Fire X4100 M2
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP APIC SPCR SLIT OEMB HPET IPET SRAT SSDT
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2216, 2393.91 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2216, 2393.64 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual-Core AMD Opteron(tm) Processor 2216, 2393.64 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual-Core AMD Opteron(tm) Processor 2216, 2393.64 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0 apid 15 pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 16 pa 0xfeafd000, version 11, 7 pins
ioapic1: misconfigured as apic 0, can't remap to apid 16
ioapic2 at mainbus0 apid 17 pa 0xfeafc000, version 11, 7 pins
ioapic2: misconfigured as apic 1, can't remap to apid 17
ioapic3 at mainbus0 apid 14 pa 0xfeaff000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 4 (P0P4)
acpiprt3 at acpi0: bus 5 (P0P5)
acpiprt4 at acpi0: bus 128 (PCIB)
acpiprt5 at acpi0: bus 133 (POGA)
acpiprt6 at acpi0: bus 134 (POGB)
acpiprt7 at acpi0: bus 131 (BR5D)
acpiprt8 at acpi0: bus 132 (BR5E)
acpiprt9 at acpi0: bus 255 (PCIC)
acpiprt10 at acpi0: bus 255 (POGA)
acpiprt11 at acpi0: bus 255 (POGB)
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpibtn at acpi0 not configured
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca4/2 spacing 1
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0: disabled to avoid ipmi0 interactions
iic1 at nviic0: disabled to avoid ipmi0 interactions
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 15 int 11 (irq 11), version 1.0, legacy support ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 15 int 5 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224SL-R, 1.0A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 15 int 15 (irq 15), address 00:14:4f:7d:92:6a
eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00pci6 at pchb4 bus 128
"NVIDIA nForce4 DDR" rev 0xa3 at pci6 dev 0 function 0 not configured
"NVIDIA CK804" rev 0xa3 at pci6 dev 1 function 0 not configured
nfe1 at pci6 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 15 int 15 (irq 7), address 00:14:4f:7d:92:6b
eephy1 at nfe1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
ppb5 at pci6 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci7 at ppb5 bus 129
ppb6 at pci6 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci8 at ppb6 bus 130
ppb7 at pci6 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci9 at ppb7 bus 131
ppb8 at pci6 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci10 at ppb8 bus 132
ppb9 at pci6 dev 16 function 0 "AMD 8132 PCIX" rev 0x12
pci11 at ppb9 bus 133
"AMD 8132 PCIX IOAPIC" rev 0x12 at pci6 dev 16 function 1 not configured
ppb10 at pci6 dev 17 function 0 "AMD 8132 PCIX" rev 0x12
pci12 at ppb10 bus 134
em0 at pci12 dev 1 function 0 "Intel PRO/1000MT (82546EB)" rev 0x03: apic 17 int 0 (irq 10), address 00:14:4f:7d:92:6c em1 at pci12 dev 1 function 1 "Intel PRO/1000MT (82546EB)" rev 0x03: apic 17 int 1 (irq 6), address 00:14:4f:7d:92:6d mpi0 at pci12 dev 2 function 0 "Symbios Logic SAS1064" rev 0x02: apic 17 int 2 (irq 7)
scsibus1 at mpi0: 108 targets
sd0 at scsibus1 targ 2 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 sec total
"AMD 8132 PCIX IOAPIC" rev 0x12 at pci6 dev 17 function 1 not configured

pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: American Megatrends Inc. Virtual Cdrom Device, rev 1.10/1.00, addr 3
umass0: using ATAPI over Bulk-Only
scsibus2 at umass0: 2 targets
cd1 at scsibus2 targ 1 lun 0: <AMI, Virtual CDROM, 1.00> SCSI0 5/cdrom removable
umass1 at uhub1 port 5 configuration 1 interface 0
umass1: American Megatrends Inc. Virtual Floppy Device, rev 1.10/1.00, addr 4
umass1: using UFI over CBI with CCI
scsibus3 at umass1: 2 targets
sd1 at scsibus3 targ 1 lun 0: <AMI, Virtual Floppy, 1.00> SCSI0 0/direct removable
sd1: drive offline
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b

Reply via email to