Hi Olaf, the new lenovo laptops, like yours and mine, do not have APM support. They are ACPI-only machines. Forget about suspend. It'll take a while yet. Nevertheless, I have an apmd set to -C and the fans kick in much less than they do on linux. I have also tried setting apmd -f /dev/acpi but it doesn't work, of course, it'd have been too easy :)
I have asked too frequently when suspend will be supported, I don't want to irritate further the developers. Just be patient. ACPI is not trivial... but I am sure that when it's fully supported (whatever this means) it'll be much better supported than in other OS's http://en.wikipedia.org/wiki/Acpi#Criticism Cheers, Pau 2007/9/11, Olaf Schreck <[EMAIL PROTECTED]>: > Hi, > > I'm having a minor problem with apm and 4.2 snapshot on a Lenovo ThinkPad R60. > > I noticed that "halt -p" does not power off. I read reboot(8), and I have > "powerdown=YES" in /etc/rc.shutdown. > > It might be related to apm0 not being detected, dmesg below. I also > noticed the error/warning "apm: connect error" from the boot loader, before > a kernel gets loaded. Might be related. > > Loading... > probing: pc0 > apm: connect error > mem[628k 3069M a20=on] > disk: hd0+ > >> OpenBSD/i386 BOOT 3.01 > boot> > > Kernel is "4.2 (GENERIC.MP) #234", snapshot was pulled today. I did > "enable acpi" with "config -ef /bsd.mp". Same problem with 4.1-stable. > > Maybe also related: In 4.2-snapshot "sysctl hw.setperf" does work, while > 4.1-stable would give me "sysctl: hw.setperf: value is not available". > > > Any clues to get apm working? > > Thanks, Olaf > > > dmesg: > > OpenBSD 4.2 (GENERIC.MP) #234: Wed Aug 8 20:52:36 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > real mem = 3219550208 (3070MB) > avail mem = 3120197632 (2975MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @ 0xfd690, > SMBIOS rev. 2.4 @ 0xe0010 (68 entries) > bios0: vendor LENOVO version "7CETC6WW (2.16 )" date 04/18/2007 > bios0: LENOVO 9461DXG > pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) > pcibios0: PCI bus #22 is the last bus > bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000! > 0xe0000/0x10000! > acpi0 at mainbus0: rev 2 > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT > SSDT SSDT > acpitimer at acpi0 not configured > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 166 MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 > GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: duplicate apic id, remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus 4 (EXP2) > acpiprt5 at acpi0: bus 12 (EXP3) > acpiprt6 at acpi0: bus 21 (PCI1) > acpiec at acpi0 not configured > acpicpu at acpi0 not configured > acpicpu at acpi0 not configured > acpitz at acpi0 not configured > acpitz at acpi0 not configured > acpibtn at acpi0 not configured > acpibtn at acpi0 not configured > acpibat at acpi0 not configured > acpibat at acpi0 not configured > acpiac at acpi0 not configured > acpidock at acpi0 not configured > cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03 > ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x7145 rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 > int 17 (irq 11) > azalia0: host: High Definition Audio rev. 1.0 > azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0 > azalia0: codec: Conexant/0x2bfa (rev. 0.0), HDA version 0.9 > azalia0: codec[1]: No support for modem function groups > azalia0: codec[1]: No audio function groups > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02 > pci2 at ppb1 bus 2 > bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x21, BCM5750 C1 > (0x4201): apic 2 int 16 (irq 11), address 00:16:d3:b8:b3:03 > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02 > pci3 at ppb2 bus 3 > wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 > int 17 (irq 11), MoW2, address 00:1b:77:53:f6:6e > ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02 > pci5 at ppb4 bus 12 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 16 > (irq 11) > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 17 > (irq 11) > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 > (irq 11) > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 19 > (irq 11) > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 19 > (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci6 at ppb5 bus 21 > cbb0 at pci6 dev 0 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 2 int 16 > (irq 11) > "TI PCIXX12 FireWire" rev 0x00 at pci6 dev 0 function 1 not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 > pcmcia0 at cardslot0 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850, RB11> SCSI0 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: apic 2 > int 16 (irq 11), AHCI 1.1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54161, SBDI> SCSI2 0/direct > fixed > sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec total > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int > 23 (irq 11) > iic0 at ichiic0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pctr: 686-class user-level performance counters enabled > mtrr: Pentium Pro MTRR support > ugen0 at uhub4 port 2 > ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 > dkcsum: sd0 matches BIOS drive 0x80 > root on sd0d swap on sd0b dump on sd0b
