Hello Daniel, Just want to make sure that we are on the same page: I'm talking about i386. It seems from below that your concern is more about amd64, but I didn't really try it, because my CPU isn't even a Xeon.
Wednesday, September 19, 2007, 6:00:16 PM, you wrote: >> I have pretty much the same picture with HP ProLiant 320 G5 (Dual Core >> Pentium-D 925). The server is new and passes all tests from the HP >> maintenance CD. DO> I couldn't make what BIOS version you were actually running there, but DO> you did check to make sure you have the latest one right? DO> http://h18023.www1.hp.com/support/files/server/us/revision/9753.html Yes, my BIOS is from 2007.04.06 that mentioned there. DO> Le me know how it goes with current... We've done "boot" testing with 4.2 -current generic.mp (with the path from http://marc.info/?l=openbsd-tech&m=118975639013313&w=2) turning on/off APIC in the BIOS (default on) and acpi in the kernel (default off). APIC off, acpi off - boots with one CPU: OpenBSD 4.2-current (GENERIC.BUILD.MP) #2: Wed Sep 19 17:11:01 CDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.BUILD.MP cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MW AIT,DS-CPL,EST,CNXT-ID,CX16,xTPR real mem = 1071640576 (1021MB) avail mem = 1028599808 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xee000 (47 entries) bios0: vendor HP version "W04" date 04/06/2007 bios0: HP ProLiant DL320 G5 pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 7 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcc400/0x1000 0xcd400/0x1000 0xce400/0x3400! 0xe6000/0x2000! acpi at mainbus0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0 ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci3 at ppb2 bus 3 bge0 at pci3 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): irq 11, address 00:1b:78:07:c9:9a brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 bge1 at pci3 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): irq 10, address 00:1b:78:07:c9:9b brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 ppb3 at pci3 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci5 at ppb4 bus 5 em0 at pci5 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 11, address 00:1b:78:57:58:e0 em1 at pci5 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 10, address 00:1b:78:57:58:e1 ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 pci6 at ppb5 bus 6 "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 0 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 1 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 2 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 3 not configured ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0: "Intel EHCI root hub", rev 2.00/1.00, addr 1 ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci7 at ppb6 bus 7 vga1 at pci7 dev 3 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Compaq iLO" rev 0x03 at pci7 dev 4 function 0 not configured "Compaq iLO" rev 0x03 at pci7 dev 4 function 2 not configured "Hewlett-Packard USB" rev 0x00 at pci7 dev 4 function 4 not configured "Hewlett-Packard IPMI" rev 0x00 at pci7 dev 4 function 6 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to na tive-PCI pciide1: using irq 7 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <FB160C4081> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pccom1: console fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask e3e5 netmask efe5 ttymask ffe7 pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b Automatic boot in progress: starting file system checks. /dev/rwd0a: file system is clean; not checking /dev/rwd0e: file system is clean; not checking /dev/rwd0d: file system is clean; not checking /dev/rwd0f: file system is clean; not checking /dev/rwd0g: file system is clean; not checking /dev/rwd0h: file system is clean; not checking setting tty flags starting network starting system logger starting initial daemons:. savecore: no core dump checking quotas: done. building ps databases: kvm dev. clearing /tmp starting pre-securelevel daemons:. setting kernel security level: kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files starting network daemons: sendmail inetd sshd. starting local daemons:. standard daemons: cron. Wed Sep 19 11:23:32 CDT 2007 APIC off, acpi on (seems like your suggestion from this thread - crashes during the boot: OpenBSD 4.2-current (GENERIC.BUILD.MP) #2: Wed Sep 19 17:11:01 CDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.BUILD.MP cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MW AIT,DS-CPL,EST,CNXT-ID,CX16,xTPR real mem = 1071640576 (1021MB) avail mem = 1028599808 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xee000 (47 entries) bios0: vendor HP version "W04" date 04/06/2007 bios0: HP ProLiant DL320 G5 pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 7 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcc400/0x1000 0xcd400/0x1000 0xce400/0x3400! 0xe6000/0x2000! acpi0 at mainbus0: rev 2panic: malloc: allocation too large Stopped at Debugger+0x4: leave Debugger(e870000,0,d08c6ca8,2,7) at Debugger+0x4 panic(d0676eaa,d08c6cc4,1000,d076a640,ffffffff) at panic+0x63 malloc(f0009bd8,2,1,d0643ce0) at malloc+0x76 acpi_load_table(0,f0009bd0,d19f3c3c,0,0) at acpi_load_table+0x19 acpi_loadtables(d19f3c00,de86ef00,1,11) at acpi_loadtables+0x14d acpi_attach(d19f1fc0,d19f3c00,d08c6e80,d19f1fc0,de86e000) at acpi_attach+0xc6 config_attach(d19f1fc0,d074752c,d08c6e80,d0488d00) at config_attach+0xfd mainbus_attach(0,d19f1fc0,0,de768000,d08c5330) at mainbus_attach+0x309 config_attach(0,d07444cc,0,0,0) at config_attach+0xfd config_rootfound(d06986a4,0,d08c6f38,d045cffe) at config_rootfound+0x27 RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb{0}> trace Debugger(e870000,0,d08c6ca8,2,7) at Debugger+0x4 panic(d0676eaa,d08c6cc4,1000,d076a640,ffffffff) at panic+0x63 malloc(f0009bd8,2,1,d0643ce0) at malloc+0x76 acpi_load_table(0,f0009bd0,d19f3c3c,0,0) at acpi_load_table+0x19 acpi_loadtables(d19f3c00,de86ef00,1,11) at acpi_loadtables+0x14d acpi_attach(d19f1fc0,d19f3c00,d08c6e80,d19f1fc0,de86e000) at acpi_attach+0xc6 config_attach(d19f1fc0,d074752c,d08c6e80,d0488d00) at config_attach+0xfd mainbus_attach(0,d19f1fc0,0,de768000,d08c5330) at mainbus_attach+0x309 config_attach(0,d07444cc,0,0,0) at config_attach+0xfd config_rootfound(d06986a4,0,d08c6f38,d045cffe) at config_rootfound+0x27 cpu_configure(0,1,3,0,2) at cpu_configure+0x29 main(0,0,0,0,0) at main+0x388 ddb{0}> c The operating system has halted. Please press any key to reboot. APIC on, acpi off (default) - hangs during boot: OpenBSD 4.2-current (GENERIC.BUILD.MP) #2: Wed Sep 19 17:11:01 CDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.BUILD.MP cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MW AIT,DS-CPL,EST,CNXT-ID,CX16,xTPR real mem = 1071640576 (1021MB) avail mem = 1028599808 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xee000 (47 entries) bios0: vendor HP version "W04" date 04/06/2007 bios0: HP ProLiant DL320 G5 pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 7 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcc400/0x1000 0xcd400/0x1000 0xce400/0x3400! 0xe6000/0x2000! acpi at mainbus0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MW AIT,DS-CPL,EST,CNXT-ID,CX16,xTPR mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type PCI mainbus0: bus 4 is type PCI mainbus0: bus 7 is type PCI mainbus0: bus 10 is type PCI mainbus0: bus 39 is type ISA ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0 ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci3 at ppb2 bus 3 bge0 at pci3 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 16 (irq 11), address 00:1b:78:07:c9:9a brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 bge1 at pci3 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17 (irq 10), address 00:1b:78:07:c9:9b brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 ppb3 at pci3 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci5 at ppb4 bus 5 em0 at pci5 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 11 (irq 11), address 00:1b:78:57:58:e0 em1 at pci5 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 10 (irq 10), address 00:1b:78:57:58:e1 ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 pci6 at ppb5 bus 6 "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 0 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 1 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 2 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 3 not configured ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0: "Intel EHCI root hub", rev 2.00/1.00, addr 1 ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci7 at ppb6 bus 7 vga1 at pci7 dev 3 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Compaq iLO" rev 0x03 at pci7 dev 4 function 0 not configured "Compaq iLO" rev 0x03 at pci7 dev 4 function 2 not configured "Hewlett-Packard USB" rev 0x00 at pci7 dev 4 function 4 not configured "Hewlett-Packard IPMI" rev 0x00 at pci7 dev 4 function 6 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to na tive-PCI pciide1: using apic 8 int 20 (irq 7) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <FB160C4081> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pccom1: console fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec [had to hard reboot here] APIC on, acpi (and acpiec) on - boots fine (tried several times) with two CPUs: OpenBSD 4.2-current (GENERIC.BUILD.MP) #2: Wed Sep 19 17:11:01 CDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.BUILD.MP cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MW AIT,DS-CPL,EST,CNXT-ID,CX16,xTPR real mem = 1071640576 (1021MB) avail mem = 1028599808 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xee000 (47 entries) bios0: vendor HP version "W04" date 04/06/2007 bios0: HP ProLiant DL320 G5 pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 7 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc0000/0xb000 0xcc400/0x1000 0xcd400/0x1000 0xce400/0x3400! 0xe6000/0x2000! acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP SPCR MCFG HPET SPMI APIC SSDT acpitimer at acpi0 not configured acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MW AIT,DS-CPL,EST,CNXT-ID,CX16,xTPR ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 7 (IP2P) acpiprt1 at acpi0: bus 4 (PCXS) acpiprt2 at acpi0: bus 3 (PCXA) acpiprt3 at acpi0: bus 2 (ICHE) acpiprt3: no apic found for irq 47 acpiprt4 at acpi0: bus 5 (IPE4) acpiprt5 at acpi0: bus 1 (PTA0) acpiprt6 at acpi0: bus 0 (PCI0) acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpitz at acpi0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0 ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci3 at ppb2 bus 3 bge0 at pci3 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 16 (irq 11), address 00:1b:78:07:c9:9a brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 bge1 at pci3 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17 (irq 10), address 00:1b:78:07:c9:9b brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0 ppb3 at pci3 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci5 at ppb4 bus 5 em0 at pci5 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 16 (irq 11), address 00:1b:78:57:58:e0 em1 at pci5 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 17 (irq 10), address 00:1b:78:57:58:e1 ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 pci6 at ppb5 bus 6 "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 0 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 1 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 2 not configured "Intel 82801GB USB" rev 0x01 at pci0 dev 29 function 3 not configured ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0: "Intel EHCI root hub", rev 2.00/1.00, addr 1 ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci7 at ppb6 bus 7 vga1 at pci7 dev 3 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Compaq iLO" rev 0x03 at pci7 dev 4 function 0 not configured "Compaq iLO" rev 0x03 at pci7 dev 4 function 2 not configured "Hewlett-Packard USB" rev 0x00 at pci7 dev 4 function 4 not configured "Hewlett-Packard IPMI" rev 0x00 at pci7 dev 4 function 6 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to na tive-PCI pciide1: using apic 8 int 20 (irq 7) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <FB160C4081> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pccom1: console fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b Automatic boot in progress: starting file system checks. /dev/rwd0a: file system is clean; not checking /dev/rwd0e: file system is clean; not checking /dev/rwd0d: file system is clean; not checking /dev/rwd0f: file system is clean; not checking /dev/rwd0g: file system is clean; not checking /dev/rwd0h: file system is clean; not checking setting tty flags starting network starting system logger starting initial daemons:. savecore: no core dump checking quotas: done. building ps databases: kvm dev. clearing /tmp starting pre-securelevel daemons:. setting kernel security level: kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files starting network daemons: sendmail inetd sshd. starting local daemons:. standard daemons: cron. Thu Sep 20 07:13:56 CDT 2007 Can't really say is it stable or not yet (need couple weeks of uptime to make some assumptions). It compiles kernel in 6 min (tried several times). Other testing will be (hopefully) just a regular work (setting up, copying files, making distributions). Several questions: Is this a "right" configuration to use? If yes, why acpi is disabled in generic.mp? Should (can) I do something about "acpicpu at acpi0 not configured" and "acpitz at acpi0 not configured"? All I did is typed "enable acpi" and "enable acpiec" in a "config -e -o". However, there are some other staff in the kernel configuration file: #option ACPIVERBOSE #option ACPI_ENABLE acpi0 at mainbus? disable #acpitimer* at acpi? #acpihpet* at acpi? #acpiac* at acpi? #acpibat* at acpi? #acpibtn* at acpi? #acpicpu* at acpi? #acpidock* at acpi? acpiec* at acpi? disable acpiprt* at acpi? #acpitz* at acpi? Should we change something and recompile? There are couple other issues about that server, but I'll create a separate thread about it. -- Best regards, Boris mailto:[EMAIL PROTECTED]
