Hello,
I'm using pf and ftp-proxy on an OpenBSD 4.2 GENERIC#374 i386 box. Most
the time everything works fine, but sometimes ftp-proxy reports a "no
route to host" in /var/log/messages. I can reproduce this behaviour, but
I'm able to ping the target ftp host on the cli at the same time
ftp-proxy reports the missing route.
The target is reachable via a carp-interface on a dot1q tagged vlan
interface.
Are there any known issues? Is there anything I can do to provide more
details?
Thanks,
Falk
dmesg:
OpenBSD 4.2 (GENERIC) #374: Thu Aug 23 10:41:10 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1400MHz ("GenuineIntel"
686-class) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 2146926592 (2047MB)
avail mem = 2068357120 (1972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xfb1e0 (47 entries)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc200/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000
0xcf000/0x1800 0xec000/0x4000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.0 interface BT iobase 0xe4/3 spacing 1 irq 10
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq
7, address 00:0f:1f:66:3c:10
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq
5, address 00:0f:1f:66:3c:11
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 3
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, ATLAS10K3_36_SCA, 120G> SCSI3
0/direct fixed
sd0: 34732MB, 31022 cyl, 4 head, 573 sec, 512 bytes/sec, 71132959 sec total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.29> SCSI2
3/processor fixed
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 7
scsibus1 at ahc1: 16 targets
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
em2 at pci2 dev 8 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
5, address 00:15:60:04:f9:34
em3 at pci2 dev 8 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
3, address 00:15:60:04:f9:35
em4 at pci2 dev 10 function 0 "Intel PRO/1000 (82542)" rev 0x03: irq 7,
address 00:02:a5:ce:48:4f
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMI
iic0 at piixpm0: disabled to avoid ipmi0 interactions
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
irq 11, version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb0 at ohci0: USB revision 1.0
uhub0 at usb0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffcd netmask ffed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
