I have an old backup drive from a Linux file server I was running. I want it to be mounted in my new openBSD, but I'm having trouble with it. I had FreeBSD on this server last and it was able to mount this ext2 fs fine after installing the e2fsprogs suite.
I built and installed the e2fsprogs suite from ports on the OpenBSD server, but when I run /usr/local/sbin/e2fsck /dev/wd1i it makes a lot of fixes and then the whole system crashes and drops me to a ddb prompt. Here's some info about the drive, any thoughts or suggestions are much appreciated. Before this happened I didn't see all the dma errors in dmesg: # dmesg |grep wd1 wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y060P0> wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 dkcsum: wd1 matches BIOS drive 0x81 wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y060P0> wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 dkcsum: wd1 matches BIOS drive 0x81 wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1i: DMA error reading fsbn -1030692568 of -1030692568-3 (wd1 bn -1030692505; cn 3238367 tn 13 sn 36), retrying wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y060P0> wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 dkcsum: wd1 matches BIOS drive 0x81 disklabel wd1i: # disklabel wd1i # /dev/rwd1i: type: ESDI disk: ESDI/IDE disk label: Maxtor 6Y060P0 flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 16 sectors/cylinder: 1008 cylinders: 16383 total sectors: 120103200 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 120103200 0 unused 0 0 # Cyl 0 -119149 i: 120103137 63 ext2fs # Cyl 0*-119149
