Hi,
I noticed one problem with the disklabel output while installing 4.2
It automatically detected the file system in my first slice which is
fat32 wrongly as 4.2BSD
But fdisk detected it correctly during the install phase
After the install I got inside the System to investigate.
The file system is indeed fat32 as you can see I mounted it with
mount_msdos successfully and listed it.
fdisk output also says the same.
Any Idea why disklabel reports it falsely to be a 4.2BSD filesystem?
Thankyou so much :-)
Kind Regards
Siju
OUTPUS BELOW--------
# disklabel wd0
# Inside MBR partition 1: type A6 start 19535040 size 19535040
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: ST340014A
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 78165360
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 18309312 19535040 4.2BSD 2048 16384 1
b: 1225728 37844352 swap
c: 78165360 0 unused 0 0
i: 19534977 63 4.2BSD 2048 16384 328
j: 15631245 39070080 ext2fs
k: 995967 54701388 unknown
l: 11711322 55697418 ext2fs
m: 10747422 67408803 ext2fs
# mount_msdos /dev/wd0i /mnt
# cd /mnt/
# ls
Recycled AUTOEXEC.BAT BOOT.INI
System Volume Information CONFIG.SYS WINDOWS
Documents and Settings IO.SYS MSDOS.SYS
NTDETECT.COM NTLDR PAGEFILE.SYS
Perl Program Files
#
# fdisk wd0
Disk: wd0 geometry: 4865/255/63 [78165360 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
*0: 0C 0 1 1 - 1215 254 63 [ 63: 19534977 ] Win95 FAT32L
1: A6 1216 0 1 - 2431 254 63 [ 19535040: 19535040 ] OpenBSD
2: 83 2432 0 1 - 3404 254 63 [ 39070080: 15631245 ] Linux files*
3: 05 3405 0 1 - 4864 254 63 [ 54701325: 23454900 ] Extended DOS
Offset: 54701325 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 82 3405 1 1 - 3466 254 63 [ 54701388: 995967 ] Linux swap
1: 05 3467 0 1 - 4195 254 63 [ 55697355: 11711385 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 55697355 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 83 3467 1 1 - 4195 254 63 [ 55697418: 11711322 ] Linux files*
1: 05 4196 0 1 - 4864 254 63 [ 67408740: 10747485 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 67408740 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 83 4196 1 1 - 4864 254 63 [ 67408803: 10747422 ] Linux files*
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
#
OpenBSD 4.2 (GENERIC) #1179: Tue Aug 28 10:37:50 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 469037056 (447MB)
avail mem = 443813888 (423MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0730 (54 entries)
bios0: vendor American Megatrends Inc. version "080012 " date 06/19/2006
bios0: ASUSTeK Computer INC. A8V-VM
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2200.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8M890 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M890 Host" rev 0x00
"VIA K8M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA K8M890 Host" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA K8M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA DeltaChrome Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT8251 SATA" rev 0x00: DMA
pciide0: using irq 5 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide1 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide1:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-830A, SS20> SCSI0
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x90: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x90: irq 4
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x90: irq 5
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x90: irq 5
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 4
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00
iic0 at viapm0
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: irq 11,
address 00:18:f3:a7:74:73
rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
pci2 at ppb1 bus 4
azalia0 at pci2 dev 1 function 0 "VIA HD Audio" rev 0x00: irq 5
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices/0x1986 (rev. 5.0), HDA version 1.0
audio0 at azalia0
ppb2 at pci0 dev 19 function 1 "VIA VT8251 PCI" rev 0x00
pci3 at ppb2 bus 5
pchb8 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb9 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb10 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb11 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: VIA UHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627EHF
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
ugen0 at uhub2 port 1
ugen0: PrimaScan iCam320, rev 1.10/1.00, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
