-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Alexandre Ratchov wrote:
> On Thu, Oct 25, 2007 at 08:08:46AM -0600, Alvaro Mantilla Gimenez wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hi,
>>
>> I have a HP Pavilion dv8000 too and, after install 4.2, i go back to
>> 4.1. The audio on vlc, xine, xmms sounds too fast and cut from time to
>> time (5-6 sec intervals)....even playing internet radio....and the HD
>> access sucks. For example: i spent more than 15 minutes doing "tar xvzf
>> ports.tar.gz". All this with the GENERIC kernel out of the box. Do you
>> experiment the same problems? I tried enable acpi too....same result.
>> On 4.1 everything works as expected (except xmms that sounds too fast too).
>>
>
> could you post your 'dmesg' and the output of
> 'audioctl -f /dev/audio0 -a' (assuming audio0 is your audio device)
>
> -- Alexandre
With 4.1 right now.....with 4.2 probably on the next 15 days (i need to
finish a work on my computer before and i can't reinstall everything
again...). Here it is:
# audioctl -f /dev/audio0 -a
name=
[EMAIL PROTECTED]
config=pCNP
encodings=ulinear:8*,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,mmap,independent
full_duplex=0
fullduplex=0
blocksize=9600
hiwat=6
lowat=4
monitor_gain=0
mode=play
play.rate=48000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=1
play.active=0
play.buffer_size=65536
record.rate=48000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=191
record.balance=32
record.port=0x1
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=1
record.active=0
record.buffer_size=65536
record.errors=0
On this kernel....i use GENERIC but i change only the name to have my
computer identify (name: LUNA):
# dmesg
OpenBSD 4.1-stable (LUNA) #0: Mon Oct 15 20:36:07 CST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/LUNA
cpu0: AMD Turion(tm) 64 Mobile Technology ML-32 ("AuthenticAMD"
686-class, 512KB L2 cache) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD erratum 89 present, BIOS upgrade may be required
real mem = 534999040 (522460K)
avail mem = 480092160 (468840K)
using 4278 buffers containing 26873856 bytes (26244K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 11/07/05, BIOS32 rev. 0 @ 0xfd610,
SMBIOS rev. 2.31 @ 0xd7810 (34 entries)
bios0: Hewlett-Packard Pavilion dv8000 (EP404UA#ABA)
pcibios0 at bios0: rev 2.1 @ 0xfd610/0x9f0
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd7800/0x800!
0xd8000/0x1000
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: PowerNow! K8 1791 MHz: speeds: 1800 1600 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200M" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 4 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x11: SMI
iic0 at piixpm0
pciide0 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AH>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L532R, HA05> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
pci3 at ppb2 bus 6
"Broadcom BCM4318" rev 0x02 at pci3 dev 2 function 0 not configured
cbb0 at pci3 dev 4 function 0 "TI PCI7XX1 CardBus" rev 0x00: irq 10
"TI PCI7XX1 FireWire" rev 0x00 at pci3 dev 4 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci3 dev 4 function 3 not configured
sdhc0 at pci3 dev 4 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 10
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
rl0 at pci3 dev 6 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:0f:b0:bc:04:c4
rlphy0 at rl0 phy 0: RTL internal PHY
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5 "ATI IXP400 AC97" rev 0x02: irq 7
auixp0: soft resetting aclink
"ATI IXP400 Modem" rev 0x02 at pci0 dev 20 function 6 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ef7d netmask ef7d ttymask ff7f
pctr: user-level cycle counter enabled
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Darfon USB Optical Mouse, rev 1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x43585430 (Conexant CX?????)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D
Stereo
audio0 at auixp0
Regards,
Alvaro
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHIewraLlBJyo5Ih8RAsoPAKCiHBXdWpg2/MMVO5OIvIOxFCd7+gCfdpV4
7jWcyHYWJGo8jVbTXluuKDA=
=lOg6
-----END PGP SIGNATURE-----
