On Sat, Oct 27, 2007 at 07:01:04PM +0100, Edd Barrett wrote:
> A couple of friends have been wanting to try out OpenBSD 4.2 on their
> machines, but the 4.2 disk will not boot whereas the 4.1 disk will.
[...]
> Has anyone else had problems booting the 4.2 CD? And is there a workaround?
I have the same problem. My 4 year old i386 test box doesn't see it as
bootable (4.[01] CDs work fine). The CD seems ok - no problem pulling
kernels, sets, and packages off it. It boots on my newer machines, and
even on an ancient (ca. 1999) NetVista. I haven't had any other issues
with the drive itself.
dmesg after manual upgrade on the no-boot box:
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 1.70GHz ("GenuineIntel" 686-class) 1.70 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 259551232 (247MB)
avail mem = 243310592 (232MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/14/03, BIOS32 rev. 0 @ 0xfb2f0, SMBIOS
rev. 2.2 @ 0xf0800 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/14/2003
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcc000/0x1800 0xce000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x03: aperture at
0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci1 at ppb0 bus 1
fxp0 at pci1 dev 3 function 0 "Intel 8255x" rev 0x10, i82551: irq 11, address
00:e0:81:52:b5:a9
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 6 function 0 "Intel 8255x" rev 0x10, i82551: irq 10, address
00:e0:81:52:b5:aa
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <SAMSUNG HD300LD>
wd1: 16-sector PIO, LBA48, 286168MB, 586072368 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 5
iic0 at ichiic0
"it8712" at iic0 addr 0x2d not configured
iic0: addr 0x2d 00=11 01=10 02=00 03=07 04=00 05=00 06=00 07=00 08=00 09=00
0a=1f 0b=5b 0c=6a 0d=18 0f=13 13=70 14=00 15=00 16=00 17=00 18=6a 19=6a 1a=6a
1b=6a 1c=6a 1d=6a 1e=6a 1f=6a 20=6a 21=5d 22=cf 23=c1 24=b8 25=3b 26=47 27=b7
29=16 2a=30 2b=2e 2c=6a 2d=6a 2e=6a 2f=6a 48=2d 51=1c 52=7f 53=7f 54=7f 58=90
59=78 5a=fd 5b=12 5c=80 5d=00 5e=00 5f=00 60=7f 61=7f 62=7f 63=7f 64=7f 65=00
66=00 67=00 68=7f 69=7f 6a=7f 6b=7f 6c=7f 6d=00 6e=00 6f=00 70=7f 71=7f 72=7f
73=7f 74=00 75=00 76=00 77=00 80=11 81=10 82=00 83=00 84=00 85=00 86=00 87=00
88=00 89=00 8a=1f 8b=5b 8c=6a 8d=18 8f=13 93=70 94=00 95=00 96=00 97=00 98=6a
99=6a 9a=6a 9b=6a 9c=6a 9d=6a 9e=6a 9f=6a a0=6a a1=5d a2=cf a3=c1 a4=b7 a5=39
a6=49 a7=b7 a9=16 aa=30 ab=2e ac=6a ad=6a ae=6a af=6a c8=2d d1=1c d2=7f d3=7f
d4=7f d8=90 d9=78 da=fd db=12 dc=80 dd=00 de=00 df=00 e0=7f e1=7f e2=7f e3=7f
e4=7f e5=00 e6=00 e7=00 e8=7f e9=7f ea=7f eb=7f ec=7f ed=00 ee=00 ef=00 f0=7f
f1=7f f2=7f f3=7f f4=00 f5=00 f6=00 f7=00: it8712
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
