On Sun, Nov 04, 2007 at 09:35:06PM -0500, Matthew Szudzik wrote:
> I just installed OpenBSD 4.2. When I run X, I no-longer have access to the
> virtual consoles. When I try to switch to a virtual console (by pressing
> CONTROL-ALT-F2, for example), the screen goes black for a few seconds and
> then my X session reappears.
>
> Moreover, when I attempt to shutdown the system, X stays running and I
> never the see the "The operating system has halted" message.
I have the problem too. In 3.9 it worked, in 4.0 it doesn't anymore.
Although I can still do ctrl-alt-backspace in X and it shuts them down.
Also, often, when I don't start X soon after the computer boots but later,
the screen fills with psychedelic colours and the machine freezes.
CL<
>
> Is there a way to fix this problem?
>
> I invoke X by including the following line in my .profile file
> startx
> And my .xinit file only contains the following three lines
> xset s off
> xmodmap -e 'add Mod4 = Super_L'
> exec fluxbox
>
> My dmesg is as follows:
>
> OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> real mem = 2137419776 (2038MB)
> avail mem = 2059087872 (1963MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/30/07, BIOS32 rev. 0 @ 0xfd6b0,
> SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
> bios0: vendor LENOVO version "79ETD3WW (2.13 )" date 04/30/2007
> bios0: LENOVO 1953CTO
> pcibios0 at bios0: rev 2.1 @ 0xfd640/0x9c0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #22 is the last bus
> bios0: ROM list: 0xc0000/0xea00! 0xdc000/0x4000! 0xe0000/0x10000!
> acpi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 166 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> mainbus0: bus 0 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type PCI
> mainbus0: bus 21 is type PCI
> mainbus0: bus 22 is type ISA
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130c2906000c29
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 2000 MHz (1356 mV): speeds: 2000, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
> 0xd0000000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic
> 2 int 11 (irq 11)
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0
> azalia0: codec: Conexant/0x2bfa (rev. 0.0), HDA version 0.9
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
> pci1 at ppb0 bus 2
> em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2
> int 11 (irq 11), address 00:15:58:82:8c:2d
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
> pci2 at ppb1 bus 3
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic
> 2 int 11 (irq 11), MoW1, address 00:1b:77:1c:31:eb
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
> pci3 at ppb2 bus 4
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
> pci4 at ppb3 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int
> 11 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int
> 11 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int
> 11 (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int
> 11 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int
> 11 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 2 int 11
> (irq 11)
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.08> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: apic
> 2 int 11 (irq 11), AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54161, SBDI> SCSI2 0/direct
> fixed
> sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
> total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2
> int 11 (irq 11)
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a swap on sd0b dump on sd0b
