Hello all,
I have problem installing packages via ftp on a new 4.2 installation.
It is a standard installation with 2 patches applied (001 and 002),dmesg
is on the bottom.
I have tried rrdtool-1.0.49p4.tgz and mc-4.6.1p1.tgz so far.
I succeeded to get mtr-0.72-no_x11.tgz installed though. I have not
tried other packages.
I tried to add missing packages manually, I mean install
gettext-0.14.6p0 by pkg_add and so on, but then again some other things
are missing.
Do I do something wrong?
Any help is appreciated.
Thanks,
Ivo
This is the result I am getting from pkg_add:
# pkg_add -v
ftp://ftp.stacken.kth.se/pub/OpenBSD/4.2/packages/i386/mc-4.6.1p1.tgz
parsing
ftp://ftp.stacken.kth.se/pub/OpenBSD/4.2/packages/i386/mc-4.6.1p1.tgz
Dependencies for mc-4.6.1p1 resolve to: gettext-0.14.6p0, unzip-5.52,
zip-2.32,
glib2-2.12.12p1, libiconv-1.9.2p3 (todo:
gettext-0.14.6p0,glib2-2.12.12p1)
mc-4.6.1p1:parsing gettext-0.14.6p0
Dependencies for gettext-0.14.6p0 resolve to: libiconv-1.9.2p3
found libspec c.41.0 in /usr/lib
Can't install gettext-0.14.6p0: lib not found expat.8.0
Dependencies for gettext-0.14.6p0 resolve to: libiconv-1.9.2p3
Full dependency tree is libiconv-1.9.2p3
found libspec iconv.4.0 in package libiconv-1.9.2p3
mc-4.6.1p1:parsing glib2-2.12.12p1
Dependencies for glib2-2.12.12p1 resolve to: gettext-0.14.6p0,
libiconv-1.9.2p3
(todo: gettext-0.14.6p0)
mc-4.6.1p1:parsing gettext-0.14.6p0
Dependencies for gettext-0.14.6p0 resolve to: libiconv-1.9.2p3
found libspec c.41.0 in /usr/lib
Can't install gettext-0.14.6p0: lib not found expat.8.0
Dependencies for gettext-0.14.6p0 resolve to: libiconv-1.9.2p3
Full dependency tree is libiconv-1.9.2p3
found libspec iconv.4.0 in package libiconv-1.9.2p3
Can't install glib2-2.12.12p1: can't resolve gettext-0.14.6p0
Can't install mc-4.6.1p1: can't resolve gettext-0.14.6p0,glib2-2.12.12p1
# pkg_add -v
ftp://ftp.stacken.kth.se/pub/OpenBSD/4.2/packages/i386/rrdtool-1.0.49p4.tgz
parsing
ftp://ftp.stacken.kth.se/pub/OpenBSD/4.2/packages/i386/rrdtool-1.0.49p4.tgz
Dependencies for rrdtool-1.0.49p4 resolve to: gd-2.0.35,
libiconv-1.9.2p3 (todo: gd-2.0.35)
rrdtool-1.0.49p4:parsing gd-2.0.35
Dependencies for gd-2.0.35 resolve to: png-1.2.18, jpeg-6bp3,
libiconv-1.9.2p3 (todo: jpeg-6bp3,png-1.2.18)
rrdtool-1.0.49p4:parsing jpeg-6bp3
found libspec c.41.0 in /usr/lib
rrdtool-1.0.49p4:jpeg-6bp3: complete
rrdtool-1.0.49p4:parsing png-1.2.18
rrdtool-1.0.49p4:png-1.2.18: complete
found libspec c.41.0 in /usr/lib
Can't install gd-2.0.35: lib not found expat.8.0
Dependencies for gd-2.0.35 resolve to: png-1.2.18, jpeg-6bp3,
libiconv-1.9.2p3 (todo: jpeg-6bp3,png-1.2.18)
Full dependency tree is png-1.2.18,jpeg-6bp3,libiconv-1.9.2p3
Can't install gd-2.0.35: lib not found fontconfig.5.1
Can't install gd-2.0.35: lib not found freetype.14.0
found libspec iconv.4.0 in package libiconv-1.9.2p3
found libspec jpeg.62.0 in package jpeg-6bp3
found libspec m.2.3 in /usr/lib
found libspec png.5.2 in package png-1.2.18
found libspec z.4.1 in /usr/lib
Can't install rrdtool-1.0.49p4: can't resolve gd-2.0.35
# dmesg
OpenBSD 4.2 (RAMDISK_CD) #468: Tue Aug 28 11:02:17 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 535326720 (510MB)
avail mem = 511623168 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/04/01, BIOS32 rev. 0 @ 0xfd87d,
SMBIOS rev. 2.2 @ 0xe4010 (41 entries)
bios0: vendor Phoenix Technologies Ltd. version "IP.01.06US " date
01/04/2001
bios0: Hewlett-Packard HP Vectra
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd810/0x7f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x1000 0xcb000/0x1000
0xcc000/0x1800 0xe4000/0xc000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active,
8000000Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
11, address 00:07:e9:a0:13:e8
em1 at pci1 dev 1 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
5, address 00:07:e9:2e:e6:3b
re0 at pci1 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), irq 9, address 00:0c:76:ae:b5:b7
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
address 00:01:02:29:ee:81
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD84AA>
wd0: 16-sector PIO, LBA, 8062MB, 16511951 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.7A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801AA AC97" rev 0x02 at pci0 dev 31 function 5 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0: Intel UHCI root hub, rev 1.00/1.00, addr 1
biomask fdc5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a swap on rd0b dump on rd0b
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 535326720 (510MB)
avail mem = 509992960 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/04/01, BIOS32 rev. 0 @ 0xfd87d,
SMBIOS rev. 2.2 @ 0xe4010 (41 entries)
bios0: vendor Phoenix Technologies Ltd. version "IP.01.06US " date
01/04/2001
bios0: Hewlett-Packard HP Vectra
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd810/0x7f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x1000 0xcb000/0x1000
0xcc000/0x1800 0xe4000/0xc000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active,
8000000Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02: aperture
at 0xf0000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
11, address 00:07:e9:a0:13:e8
em1 at pci1 dev 1 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
5, address 00:07:e9:2e:e6:3b
re0 at pci1 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), irq 9, address 00:0c:76:ae:b5:b7
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
address 00:01:02:29:ee:81
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD84AA>
wd0: 16-sector PIO, LBA, 8062MB, 16511951 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.7A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 9,
ICH AC97
ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0: Intel UHCI root hub, rev 1.00/1.00, addr 1
biomask ff45 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
#
Thanks,
Ivo
