Hi guys,
I have a Linksys WUSB11 v2.8 802.11 USB wireless adapter on a fresh OpenBSD
4.2 install. It is recognized as an atu0 device. Internally it works great.
I can ping all of the IPs inside the gateway (and ping the gateway) and
browse to internal web sites, etc. Externally, I have no connectivity on
atu0, but I can get outside on my wired (fxp0) interface. Here's the
relevant portion of my ifconfig with the wired (fxp0) interface down:
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:8b:67:04:60
groups: egress
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::250:8bff:fe67:460%fxp0 prefixlen 64 scopeid 0x1
atu0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0c:41:56:f4:30
groups: wlan egress
media: IEEE802.11 autoselect (DS1 mode 11b)
status: active
ieee80211: nwid NETGEAR chan 11 bssid 00:0f:b5:c5:31:7e 87%
inet 192.168.0.127 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::20c:41ff:fe56:f430%atu0 prefixlen 64 scopeid 0x4
I've tried adding atu0 to the 'egress' group, but still no go. Any ideas?
Thanks,
Brad
--
View this message in context:
http://www.nabble.com/Connectivity-Issues-with-Linksys-802.11-USB-Adapter-tf4802127.html#a13739799
Sent from the openbsd user - misc mailing list archive at Nabble.com.
