On Fri, 16 Nov 2007 06:59:18 +0700, Henning Brauer <[EMAIL PROTECTED]>
wrote:
* Lord Sporkton <[EMAIL PROTECTED]> [2007-11-15 23:44]:
Is it possible to nest a neighbor group inside another neighbor group
in bgpd.conf?
It gives me an errors on the nested group statement when i try to
start bgpd. is there a way around this or am i missing something i
need to nest?
no, no nesting
Hi Henning,
Sorry to directly email to you, it seem [email protected] don't receive my
emails anymore. There something I need to ask you about openBSD routers.
I'm currently setting up 2 of them, identical, loadbalanced/redundant with
CARP, bgpd. Things that I need to know are;
(1) You mention before to use i386 Kernel and UP on gigabit routers, is it
still the same thing with 4.2 -current kernel, since I use amd64 MP
(2) How is carp(4) perform under heavy load with respect to pf(4)?
(3) Is there any other tune-able aspects on the kernel via config(8) or
sysctl(8) to achieve the best performance?
(4) can I just do "pass in log all" on pf(4) on the first filter rule and
block only unwanted incoming traffic to the machine only?
Thank you Henning,
Best Regards,
--
Insan Praja SW
OpenBSD 4.2-current (GENERIC.MP) #0: Thu Nov 8 10:19:07 WIT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1069101056 (1019MB)
avail mem = 1026523136 (978MB)
RTC BIOS diagnostic error e<fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fbf4000 (42 entries)
bios0: vendor Intel Corporation version
"S3000.86B.02.00.0044.071120071047" date 07/11/2007
bios0: Intel S3000AH
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4)
UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(
S4)
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz, 3000.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz, 2999.90 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 5 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus 2 (PEX4)
acpiprt7 at acpi0: bus 3 (PEX5)
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 5
int 17 (irq 9), address 00:15:17:25:0a:9d
"Intel 82573E AMT" rev 0x03 at pci3 dev 0 function 3 not configured
"Intel 82573E KCS (Active Management)" rev 0x03 at pci3 dev 0 function 4
not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 5 int
23 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 5 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 5 int
18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 5 int
16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 5 int
23 (irq 11)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci4 at ppb3 bus 4
rl0 at pci4 dev 0 function 0 "Realtek 8139" rev 0x10: apic 5 int 21 (irq
11), address 00:80:48:1f:75:53
rlphy0 at rl0 phy 0: RTL internal PHY
em1 at pci4 dev 1 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 5
int 22 (irq 11), address 00:07:e9:0f:44:ac
vga1 at pci4 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em2 at pci4 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5
int 17 (irq 9), address 00:15:17:25:0a:9e
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configur
ed to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide1: using apic 5 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160211AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 5
int 19 (irq 10)
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d100 rev 0x69
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
