On Wednesday, November 21, 2007 at 11:56:48 +0100, Bruce O'Neel wrote:
>Hi,
>
>Using OpenBSD 4.2 on a Mac G3 and/or a Lombard G3 (dmesg below) I quickly get:
>
>
>Nov 20 22:20:26 bellinzona /bsd: fxp0: device timeout
>Nov 20 22:57:42 bellinzona /bsd: fxp0: device timeout
>
>Nov 21 07:33:43 bellinzona /bsd: xl0: watchdog timeout
>Nov 21 07:34:28 bellinzona /bsd: xl0: watchdog timeout
>Nov 21 07:37:01 bellinzona /bsd: xl0: watchdog timeout
>
>and the network card drops off line. This makes 4.2 not so usable.
>It happens with different interfaces both on the PowerMac G3 and on the
>Lombard.
I noticed the same behaviour with em, bge and xl NIC's on a G3
(PowerMac1,1, dmesg below of the machine running 4.1-stable).
No problems with 4.2 on a G4 (PowerMac3,1), no problems with 4.1 on the
same G3 (PowerMac1,1).
Maurice
[ using 364116 bytes of bsd ELF symbol table ]
console out [ATY,Rage128y]console in [keyboard] ADB found
: memaddr 88000000 size 8000000, : consaddr 88000000, : ioaddr 80920000, size
20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.1-stable (GENERIC) #3: Sat Oct 27 12:13:04 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 268435456 (262144K)
avail mem = 236310528 (230772K)
using 1254 buffers containing 13418496 bytes (13104K) of memory
mainbus0 (root): model PowerMac1,1
cpu0 at mainbus0: 750 (Revision 0x8201): 400 MHz: 1MB backside cache
mpcpcibr0 at mainbus0 pci: grackle, Revision 0x40
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 0 function 0 "Motorola MPC106 PCI" rev 0x40
ppb0 at pci0 dev 13 function 0 "DEC 21154 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
"TI TSB12LV21 FireWire" rev 0x02 at pci1 dev 0 function 0 not configured
pciide0 at pci1 dev 1 function 0 "CMD Technology PCI0646" rev 0x05: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 26 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST320014A>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
bge0 at pci1 dev 3 function 0 "Broadcom BCM5701" rev 0x15, BCM5701 B5 (0x0105):
irq 24, address 00:04:76:f8:44:37
brgphy0 at bge0 phy 1: BCM5701 10/100/1000baseT PHY, rev. 0
macobio0 at pci1 dev 5 function 0 "Apple Paddington" rev 0x00
macintr0 at macobio0 offset 0x10
mesh0 at macobio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at macobio0 offset 0x14000: irq 17,8,9 headphones
audio0 at awacs0
"power-mgt" at macobio0 offset 0x0 not configured
"fdc" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 18: via-cuda, 0 targets
pi2c0 at adb0
iic0 at pi2c0
wdc0 at macobio0 offset 0x20000 irq 13: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, CD-ROM CDU601-25, 1.0p> SCSI0 5/cdrom
removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
bm0 at macobio0 offset 0x11000 irq 42,33: address 00:05:02:b1:53:c9
lxtphy0 at bm0 phy 0: LXT970 10/100 PHY, rev. 1
"nvram" at macobio0 offset 0x60000 not configured
ohci0 at pci1 dev 6 function 0 "Opti 82C861" rev 0x10: irq 28, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 GL" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
bootpath: '/pci/@d/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator, rev
2.00/1.41, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator, rev
2.00/1.41, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=5, output=0, feature=0
