I recently got a T60p ThinkPad to replace my A31p. Lots of stuff
works, but sound has proved to be a problem. I can play MP3s, but
with extremely low audio, barely there but from what I can hear it
sounds OK. This happens with both the speakers and headphones.
I suspect something isn't right since I get a time out message
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
azalia0: RIRB time out
azalia0: codec[s]: Analog Devices AD1981HD, 0x0000/0x0000, using Analog
Devices AD1981HD
audio0 at azalia0
Playing with audioctl and mixerctl I can't seem to change the volume.
Any ideas? Relevant outputs of audioctl, mixerctl and dmesg output
below.
Thanks, STeve Andre'
audioctl -a ------------------------------------
name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_le:16
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=384
hiwat=170
lowat=127
output_muted=0
monitor_gain=0
mode=
play.rate=8000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=8000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=127
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0
mixerctl -a --------------------------------
outputs.dac.source=hdaudio
outputs.lineout.source=dac2
outputs.lineout.mute=off
outputs.lineout=124,124
outputs.lineout=85,85
outputs.lineout.dir=output
outputs.lineout.boost=off
outputs.lineout.eapd=off
outputs.hp.source=dac2
outputs.hp.mute=off
outputs.hp=124,124
outputs.hp.boost=off
outputs.mono.mute=off
outputs.mono=124
outputs.mic=85,85
outputs.linein.source=dac2
outputs.linein.mute=off
outputs.linein=124,124
outputs.linein=85,85
outputs.linein.dir=output
inputs.sel.source=dac2
inputs.beep.source=beep
outputs.beep.mute=off
outputs.beep=119
outputs.sel3.mute=off
outputs.sel3=120,120
outputs.sel4.mute=off
outputs.sel4=120,120
outputs.sel5.mute=off
outputs.sel5=120,120
outputs.pow.source=beep
inputs.sel6.source=mix
outputs.sel6.mute=off
outputs.sel6=119,119
outputs.mic2.source=dac2
outputs.mic2.mute=off
outputs.mic2=124,124
outputs.mic2=85,85
outputs.mic2.dir=output
outputs.sel7.mute=off
outputs.sel7=120,120
outputs.sel8.mute=off
outputs.sel8=120,120
outputs.sel9.mute=off
outputs.sel9=120,120
outputs.speaker.mute=off
outputs.speaker=120,120
outputs.sel11.mute=off
outputs.sel12.mute=off
inputs.usingdac=03
dmesg ---------------------------------
OpenBSD 4.2-current (GENERIC) #79: Thu Nov 22 21:21:36 EST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2145808384 (2046MB)
avail mem = 2067062784 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/19/07, BIOS32 rev. 0 @ 0xfd6b0,
SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "7IET31WW (1.12 )" date 09/19/2007
bios0: LENOVO 8741C5U
pcibios0 at bios0: rev 2.1 @ 0xfd640/0x9c0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #22 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) EXP1(S4)
EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table ECDT not configured
acpi device at acpi0 from table TCPA not configured
acpi device at acpi0 from table APIC not configured
acpi device at acpi0 from table MCFG not configured
acpihpet0 at acpi0 table HPET: 14318179 Hz
acpi device at acpi0 from table SLIC not configured
acpi device at acpi0 from table BOOT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpi device at acpi0 from table SSDT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, FVS, 2333, 2000, 1667, 1333, 1000 MHz
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4511" serial 20845 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpidock at acpi0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility FireGL V5250" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
azalia0: RIRB time out
azalia0: codec[s]: Analog Devices AD1981HD, 0x0000/0x0000, using Analog
Devices AD1981HD
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: irq 11,
address 00:16:41:e6:3c:fd
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ath0 at pci3 dev 0 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11
ath0: ARxxxx 10.3 phy 6.1 rf 10.2, WOR2W, address 00:19:7d:d7:68:aa
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci5 at ppb4 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500BEVS-11UST0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: irq 11,
AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BEVS-1, 01.0> SCSI2 0/direct
fixed
sd0: 238475MB, 30401 cyl, 255 head, 63 sec, 512 bytes/sec, 488397168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 11
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edfd netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01
addr 2
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
