hi!
i have some problems with getting ACPI going on the notebook.
(the same problems seems to appear for compaq 6910p [much
newer notebook] but this may be just because i need to run
amd64 port on it). i also want to point that some versions of
current were hanging up instead of instant reboot.
so the notebook crashes when i try to "disable apm" and
leave acpi enabled. the current is really current.
boot with verbose looks like the example attached at
the bottom.
also these notebooks seem to have some bad carma
WRT ACPI, as acpidump crashes with:
assertion "dp == end" failed: file
"/data/src/usr.sbin/acpidump/asl_dump.c", line 703, function
"asl_dump_defif"
Abort trap (core dumped)
if somebody is interested and can help somehow,
please contact me, i will do any debugging necessary.
dmesg with acpi enabled crash followed by the normal boot:
OpenBSD 4.2-current (GENERIC) #0: Mon Nov 26 13:35:46 EET 2007
[EMAIL PROTECTED]:/data/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 536244224 (511MB)
avail mem = 510619648 (486MB)
User Kernel Config
UKC> disable apm
316 apm0 disabled
UKC> verbose
autoconf verbose enabled
UKC> exit
Continuing...
>>> probing for mainbus0
>>> mainbus probe returned 1
mainbus0 at root
>>> probing for pci*
>>> pci probe returned 0
>>> probing for isa0
>>> isa probe returned 0
>>> probing for eisa0
>>> eisa probe returned 0
>>> probing for bios0
>>> bios probe returned 1
>>> probing for cpu0
>>> cpu probe returned 0
>>> probing for acpi0
>>> acpi probe returned 0
>>> probing for esm0
>>> esm probe returned 0
>>> bios probe won
bios0 at mainbus0: AT/286+ BIOS, date 12/12/03, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xff0dc (29 entries)
bios0: vendor Hewlett-Packard version "68BDD Ver. F.09" date 12/12/2003
bios0: Hewlett-Packard HP Compaq nc6000 (DJ256A#ABB)
>>> probing for pcibios0
>>> pcibios probe returned 0
>>> no winning probe
apm at bios0 function 0x15 not configured
>>> probing for pcibios0
>>> pcibios probe returned 1
>>> pcibios probe won
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf51c0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000
>>> probing for pci*
>>> pci probe returned 0
>>> probing for isa0
>>> isa probe returned 0
>>> probing for eisa0
>>> eisa probe returned 0
>>> probing for cpu0
>>> cpu probe returned 0
>>> probing for acpi0
>>> acpi probe returned 1
>>> probing for esm0
>>> esm probe returned 0
>>> acpi probe won
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices C058(S5) C0AD(S3) C0B4(S3) C0B5(S3) C0B6(S3)
>>> probing for acpitimer*
>>> acpitimer probe returned 1
>>> probing for acpiac*
>>> acpiac probe returned 0
>>> probing for acpibat*
>>> acpibat probe returned 0
>>> probing for acpibtn*
>>> acpibtn probe returned 0
>>> probing for acpicpu*
>>> acpicpu probe returned 0
>>> probing for acpihpet*
>>> acpihpet probe returned 0
>>> probing for acpiec*
>>> acpiec probe returned 0
>>> probing for acpitz*
>>> acpitz probe returned 0
>>> probing for acpiprt*
>>> acpiprt probe returned 0
>>> acpitimer probe won
acpitimer0 at acpi0: 3579545 Hz, 24 bits
>>> probing for acpitimer*
>>> acpitimer probe returned 0
>>> probing for acpiac*
>>> acpiac probe returned 0
>>> probing for acpibat*
>>> acpibat probe returned 0
>>> probing for acpibtn*
>>> acpibtn probe returned 0
>>> probing for acpicpu*
>>> acpicpu probe returned 0
>>> probing for acpihpet*
>>> acpihpet probe returned 0
>>> probing for acpiec*
>>> acpiec probe returned 0
>>> probing for acpitz*
>>> acpitz probe returned 0
>>> probing for acpiprt*
>>> acpiprt probe returned 0
>>> no winning probe
>>> probing for acpitimer*
>>> acpitimer probe returned 0
>>> probing for acpiac*
>>> acpiac probe returned 0
>>> probing for acpibat*
>>> acpibat probe returned 0
>>> probing for acpibtn*
>>> acpibtn probe returned 0
>>> probing for acpicpu*
>>> acpicpu probe returned 0
>>> probing for acpihpet*
>>> acpihpet probe returned 0
>>> probing for acpiec*
>>> acpiec probe returned 0
>>> probing for acpitz*
>>> acpitz probe returned 0
>>> probing for acpiprt*
>>> acpiprt probe returned 0
>>> no winning probe
>>> probing for acpitimer*
>>> acpitimer probe returned 0
>>> probing for acpiac*
>>> acpiac probe returned 0
>>> probing for acpibat*
>>> acpibat probe returned 0
>>> probing for acpibtn*
>>> acpibtn probe returned 0
>>> probing for acpicpu*
>>> acpicpu probe returned 0
>>> probing for acpihpet*
>>> acpihpet probe returned 0
>>> probing for acpiec*
>>> acpiec probe returned 0
>>> probing for acpitz*
>>> acpitz probe returned 0
>>> probing for acpiprt*
>>> acpiprt probe returned 0
>>> no winning probe
OpenBSD 4.2-current (GENERIC) #0: Mon Nov 26 13:35:46 EET 2007
[EMAIL PROTECTED]:/data/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 536244224 (511MB)
avail mem = 510619648 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/03, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xff0dc (29 entries)
bios0: vendor Hewlett-Packard version "68BDD Ver. F.09" date 12/12/2003
bios0: Hewlett-Packard HP Compaq nc6000 (DJ256A#ABB)
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf51c0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1600 MHz (1484 mV): speeds: 1600, 1400, 1200,
1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
agp0 at pchb0: aperture at 0xb0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address 00:0b:cd:5b:e0:32
cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
"O2 Micro OZ711Mx CardBus" rev 0x00 at pci2 dev 6 function 2 not configured
cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M Alt" rev 0x03,
BCM5705 A3 (0x3003): irq 11, address 00:14:38:1b:a7:61
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
cardslot2 at cbb2 slot 2 flags 0
cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20
pcmcia2 at cardslot2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configu
red to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2512, 1A04> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq
11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e74d netmask ef4d ttymask ffcf
mtrr: Pentium Pro MTRR support
ugen0 at uhub3 port 1 "ACTIONTEC Bluetooth by hp" rev 1.10/8.02 addr 2
softraid0 at root
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
