Hello,
When booting 4.2 I cannot see sk0 anymore. I could see it no problem under 4.0
with no customized settings.
Do I need to force it somehow with pcibios? If so how can I set this?
nfe0 still shows up fine.
thanks.
Moe
OpenBSD 4.2 (PC-RAID) #0: Fri Nov 23 12:34:06 JST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/BLAZER-RAID
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.93 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804814848 (767MB)
avail mem = 769695744 (734MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/04/04, BIOS32 rev. 0 @
0xfb3e0, SMBIOS rev. 2.2 @ 0xf0000 (48 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS A7N8X-E Deluxe
ACPI BIOS Rev 1009 " date 02/04/2004
bios0: ASUSTeK Computer INC. A7N8X-E
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x9400 0xcc000/0x4000! 0xd0000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
asbtm0 at iic1 addr 0x2d
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: irq 10,
version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: irq 11,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11,
address 00:0e:a6:90:5a:c4
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
"NVIDIA nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 5,
nForce2 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-00DEA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD1200JB-00CRA1>
wd1: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 3
vga1 at pci2 dev 0 function 0 "NVIDIA Riva TNT2" rev 0x15
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
biomask ff45 netmask ff45 ttymask ffc7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
