> On Mon, Dec 10, 2007 at 04:56:39PM +0100, [EMAIL PROTECTED]
> wrote:
>> I noticed some crazy behavior lately,
>
> dmesg?
Sure :)
Just wanted to know if it's known. Not that I may missed a mail at misc@
or so where it was discussed and a solution presented.
--
dmesg
I recompiled (again) to ensure the kernelimage is ok (but did no CVS up so
the code is identical).
--
OpenBSD 4.2-current (GENERIC.MP) #0: Sun Dec 9 19:52:06 CET 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU 2140 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
real mem = 2145808384 (2046MB)
avail mem = 2066972672 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/30/07, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfc5e0 (47 entries)
bios0: vendor American Megatrends Inc. version "V1.2" date 05/30/2007
bios0: Micro-Star 7255
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB
acpi0: wakeup devices PCIE(S0) PE0_(S0) PS2K(S0) PS2M(S0) USB1(S0)
USB2(S0) USB3(S0) USB4(S0) EHCI(S0) ILAN(S0) PCI1(S0) PCI2(S0) SLPB(S4)
PWRB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU 2140 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfecc0000, version 3, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (NBPG)
acpiprt3 at acpi0: bus 3 (NBP0)
acpiprt4 at acpi0: bus 4 (P0P9)
acpiprt5 at acpi0: bus 5 (P0PA)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA P4M890 Host" rev 0x00
agp0 at pchb0: v3, aperture at 0xf0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA P4M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA P4M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA P4M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA P4M890 Host" rev 0x00
"VIA P4M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA P4M890 Security" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA P4M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA P4M890 PCI-PCI" rev 0x00: apic 3 int 3
(irq 10)
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 vendor "ATI", unknown product 0x9589 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci2 dev 0 function 1 vendor "ATI", unknown product 0xaa08 rev
0x00: apic 3 int 1 (irq 10)
azalia0: /usr/src/sys/dev/pci/azalia.c/1350 invalid PCM format: 0x00000000
azalia0: No codecs found
ppb2 at pci0 dev 3 function 0 "VIA P4M890 PCI-PCI" rev 0x00: apic 3 int 7
(irq 10)
pci3 at ppb2 bus 3
pciide0 at pci0 dev 15 function 0 "VIA VT8237A SATA" rev 0x80: DMA
pciide0: using apic 2 int 21 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3000000>
wd0: 16-sector PIO, LBA48, 238475MB, 48800000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd1 at pciide1 channel 0 drive 0: <Maxtor 00000000>
wd1: 16-sector PIO, LBA, 117246MB, 20000000 sectors
wd1(pciide1:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW 000000, 0000> SCSI0
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xa0: apic 2 int 20
(irq 5)
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xa0: apic 2 int 22
(irq 11)
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xa0: apic 2 int 21
(irq 7)
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xa0: apic 2 int 23
(irq 10)
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
(irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=c2 01=06 02=01 03=01 04=07 05=00 06=00 07=00 14=14
15=62 16=03 17=04 words 00=c2ff 01=06ff 02=01ff 03=01ff 04=07ff 05=00ff
06=00ff 07=00ff 08=ffff 09=ffff 0a=ffff 0b=ffff 0c=ffff 0d=ffff 0e=ffff
0f=ffff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: apic 2 int 23 (irq
5), address 00:00:00:00:00:00
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
ppb3 at pci0 dev 19 function 0 "VIA VT8237A PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
azalia1 at pci4 dev 1 function 0 "VIA HD Audio" rev 0x10: apic 2 int 17
(irq 11)
azalia1: codec[s]: VIA/0x1708
audio0 at azalia1
ppb4 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI" rev 0x00
pci5 at ppb4 bus 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft Basic
Optical Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
Thanks for the improved fsck btw! :)
Something wich never worked so far: "SpeedStep". The CPU should be able to
throtle down and the board provides it too. But it never worked (not with
4.2 using apm nor now).
Also something odd: the num-bloc LED doesn't light up if I'm using X. If I
switch back to the terminal it works just fine. :-]
If you may need further things like a acpidump output or so pls. tell me.
I can't write down a trace (and co) because I don't get droped into a ddb...
Kind regards,
Sebastian
--
Don't buy anything from YeongYang.
Their Computercases are expensiv, they WTX-powersuplies start burning and
their support refuse any RMA even there's still some warenty.
