On 2007/12/10 17:32, Stuart Henderson wrote:
> On 2007/12/10 17:06, Stuart Henderson wrote:
> > I've got a ServerWorks-based Fujitsu-Siemens Xeon box. At 'halt -p'
> > (with or without acpi) the following happens (no panic).
>
> Ugh. 'reboot', too.
More info: with bsd.mp, reboot drops to ddb too, but differently.
(GENERIC.MP dmesg is added right at the bottom). halt -p works.
At this point 'c' allows the reboot/halt to proceed, so at least
I no longer need a power-cycle.
This works ok in 4.0, not in 4.1/newer.
sycing disks... done
Stopped at __mp_lock+0x3e: movl 0x4(%edx),%eax
ddb{1}> tr
__mp_lock(d07cc144,d048767a,dac34f1c,dac34f1c) at __mp_lock+0x3e
i386_softintlock(0,d0350058,d6b50010,10,dac30010) at i386_softintlock+0x10
Xintrltimer() at Xintrltimer+0x47
--- interrupt ---
cpu_idle_cycle(d1270800) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0911e78
ddb{1}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
6898 1 6898 0 7 0x2004002 reboot
15 0 0 0 3 0x100200 bored crypto
14 0 0 0 3 0x2100200 aiodoned aiodoned
13 0 0 0 2 0x2100200 update
12 0 0 0 3 0x2100200 cleaner cleaner
11 0 0 0 3 0x100200 reaper reaper
10 0 0 0 3 0x2100200 pgdaemon pagedaemon
9 0 0 0 2 0x2100600 pfpurge
8 0 0 0 3 0x2100200 usbtsk usbtask
7 0 0 0 3 0x2100200 usbevt usb0
6 0 0 0 3 0x2100200 acpi_idle acpi0
* 5 0 0 0 7 0x100200 idle1
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x2100200 kmalloc kmthread
1 0 1 0 3 0x2004080 wait init
0 -1 0 0 3 0x2080200 scheduler swapper
Another time,
syncing disks... done
Stopped at lapic_delay+0x3a: cmpl %esi,%edi
ddb{0}> tr
lapic_delay(3e8,0,4,fffffebf) at lapic_delay+0x3a
ahd_reset(d1278000,0,804010,dac4aeb0,d02032c9) at ahd_reset+0xae
ahd_shutdown(d1278000,1fca5097,2,145886) at ahd_shutdown+0x2e
dohooks(d078bf00,1,dac4af00,d047c915) at dohooks+0x6b
boot(0,0,dac4af40,0,d078af34) at boot+0x63
sys_reboot(d6a47568,dac4af68,dac4af58,ffffffff,2a) at sys_reboot+0x26
syscall() at syscall+0x27e
--- syscall (number 55) ---
0x1c0009c1:
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
*10478 1 10478 0 7 0x2805002 reboot
15 0 0 0 3 0x100200 bored crypto
14 0 0 0 3 0x2100200 aiodoned aiodoned
13 0 0 0 2 0x2100200 update
12 0 0 0 3 0x2100200 cleaner cleaner
11 0 0 0 3 0x100200 reaper reaper
10 0 0 0 3 0x2100200 pgdaemon pagedaemon
9 0 0 0 2 0x2100600 pfpurge
8 0 0 0 3 0x2100200 usbtsk usbtask
7 0 0 0 3 0x2100200 usbevt usb0
6 0 0 0 3 0x2100200 acpi_idle acpi0
5 0 0 0 7 0x100200 idle1
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x2100200 kmalloc kmthread
1 0 1 0 3 0x2004080 wait init
0 -1 0 0 2 0x2080200 swapper
On 2007/12/10 17:32, Stuart Henderson wrote:
> On 2007/12/10 17:06, Stuart Henderson wrote:
> > I've got a ServerWorks-based Fujitsu-Siemens Xeon box. At 'halt -p'
> > (with or without acpi) the following happens (no panic).
>
> Ugh. 'reboot', too.
>
> > Any suggestions?
> >
> > # halt -p
> > /etc/rc.shutdown in progress...
> > /etc/rc.shutdown complete.
> > sycing disks... done
> > Stopped at gettick+0xec: inb $0x40,%al
> > ddb> tr
> > gettick(d116d000,4,186a0,3e8,d116d000) at gettick+0xec
> > i8254_delay(3e8,0,4,fffffebf) at i8254_delay+0x11
> > ahd_reset(d116d000,0,804010,dab27eb0,d0202251) at ahd_reset+0xae
> > ahd_shutdown(d116d000,2e9b,dab27ee0,d05caedd) at ahd_shutdown+0x2e
> > dohooks(d0782000,1,dab27f00,d047a654) at dohooks+0x6b
> > boot(1008,0,dab27f40,0,d0781034) at boot+0x63
> > sys_reboot(d693dc20,dab27f68,dab27f58,ffffffff,30) at sys_reboot+0x26
> > syscall() at syscall+0x24e
> > --- syscall (number 55) ---
> > 0x1c0009c1:
> > ddb> ps
> > PID PPID PGRP UID S FLAGS WAIT COMMAND
> > *21404 1 21404 0 7 0x4002 halt
> > 14 0 0 0 3 0x100200 bored crypto
> > 13 0 0 0 3 0x100200 aiodoned aiodoned
> > 12 0 0 0 2 0x100200 update
> > 11 0 0 0 3 0x100200 cleaner cleaner
> > 10 0 0 0 3 0x100200 reaper reaper
> > 9 0 0 0 3 0x100200 pgdaemon pagedaemon
> > 8 0 0 0 2 0x100600 pfpurge
> > 7 0 0 0 3 0x100200 usbtsk usbtask
> > 6 0 0 0 3 0x100200 usbevt usb0
> > 5 0 0 0 3 0x100200 acpi_idle acpi0
> > 4 0 0 0 3 0x100200 bored syswq
> > 3 0 0 0 3 0x100200 idle0
> > 2 0 0 0 3 0x100200 kmalloc kmthread
> > 1 0 1 0 3 0x4080 wait init
> > 0 -1 0 0 2 0x80200 swapper
> > ddb> boot r
> > panic: mtx_enter: locking against myself
> > Stopped at Debugger+0x4: leave
> > RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
> > PANIC!
> > DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> > ddb> tr
> > Debugger(dab27b8f,dab27b90,d031c2a2,0,dab27c44) at Debugger+0x4
> > panic(d0202216,dab27bc0,d05cae6d,d0791ccc,16e35e) at panic+0x63
> > mtx_enter(d0791ccc,16e35e,d0,3e,d06a45e7) at mtx_enter+0x5a
> > gettick(dab27be4,14,dab27c00,4804,dab27c44) at gettick+0xe5
> > i8254_delay(3d0900,dab27c44,dab27c20,d031c59d,d06a45ad) at
> > i8254_delay+0x11
> > boot(4804,3f8,dab27c40,0,0) at boot+0x3c
> > db_boot_poweroff_cmd(d05cae74,0,ffffffff,dab27c48,d0780080) at
> > db_boot_poweroff
> > _cmd
> > db_command(d0780080,d077fea0,dab27d50,d031b48d,dab27d2c) at
> > db_command+0xff
> > db_command_loop(0,dab27dd8,dab27d90,d04776cf,9) at db_command_loop+0x8a
> > db_trap(9,0,d6a4a18c,d022736e,d6a4a1e5) at db_trap+0x90
> > kdb_trap(9,0,dab27dd8,d0) at kdb_trap+0xab
> > trap() at trap+0x95
> > --- trap (number 9) ---
> > gettick(d116d000,4,186a0,3e8,d116d000) at gettick+0xec
> > i8254_delay(3e8,0,4,fffffebf) at i8254_delay+0x11
> > ahd_reset(d116d000,0,804010,dab27eb0,d0202251) at ahd_reset+0xae
> > ahd_shutdown(d116d000,2e9b,dab27ee0,d05caedd) at ahd_shutdown+0x2e
> > dohooks(d0782000,1,dab27f00,d047a654) at dohooks+0x6b
> > boot(1008,0,dab27f40,0,d0781034) at boot+0x63
> > sys_reboot(d693dc20,dab27f68,dab27f58,ffffffff,30) at sys_reboot+0x26
> > syscall() at syscall+0x24e
> > --- syscall (number 55) ---
> > 0x1c0009c1:
> >
> > OpenBSD 4.2-current (GENERIC) #591: Sat Dec 8 21:46:43 MST 2007
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> > real mem = 536371200 (511MB)
> > avail mem = 510763008 (487MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 09/10/04, BIOS32 rev. 0 @ 0xfd907,
> > SMBIOS rev. 2.31 @ 0xef360 (68 entries)
> > bios0: vendor FUJITSU SIEMENS // Phoenix Technologies Ltd. version "4.06
> > Rev. 1.12.1409" date 09/10/2004
> > bios0: FUJITSU SIEMENS D1409
> > acpi0 at bios0: rev 0
> > acpi0: tables DSDT FACP SPCR APIC BOOT
> > acpi0: wakeup devices PCI0(S4) USB_(S1) KEYB(S1) PS2M(S1) COM2(S4) COM1(S4)
> > PCIA(S4) PCIB(S4) PCIC(S4) PCID(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 32 bits
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (PCIA)
> > acpiprt2 at acpi0: bus 2 (PCIB)
> > acpiprt3 at acpi0: bus 3 (PCIC)
> > acpiprt4 at acpi0: bus 4 (PCID)
> > acpicpu0 at acpi0
> > acpibtn0 at acpi0: PWRB
> > bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1800 0xca800/0x9e00
> > ipmi at mainbus0 not configured
> > cpu0 at mainbus0
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
> > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
> > pci1 at pchb1 bus 1
> > pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
> > pci2 at pchb2 bus 3
> > ahd0 at pci2 dev 4 function 0 "Adaptec AIC-7902 U320" rev 0x03: irq 5
> > ahd0: aic7902, U320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
> > scsibus0 at ahd0: 16 targets
> > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAP3367NC, 5207> SCSI3 0/direct
> > fixed
> > sd0: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
> > sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAP3367NC, 5207> SCSI3 0/direct
> > fixed
> > sd1: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
> > sd2 at scsibus0 targ 2 lun 0: <FUJITSU, MAP3367NC, 5207> SCSI3 0/direct
> > fixed
> > sd2: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
> > safte0 at scsibus0 targ 8 lun 0: <SDR, GEM318, 0> SCSI2 3/processor fixed
> > ahd1 at pci2 dev 4 function 1 "Adaptec AIC-7902 U320" rev 0x03: irq 12
> > ahd1: aic7902, U320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
> > scsibus1 at ahd1: 16 targets
> > vga1 at pci0 dev 4 function 0 "ATI Rage XL" rev 0x27
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB6" rev 0xa0: polling
> > iic0 at piixpm0
> > spdmem0 at iic0 addr 0x54: 256MB DDR SDRAM registered ECC PC2300CL2.5
> > spdmem1 at iic0 addr 0x55: 256MB DDR SDRAM registered ECC PC2300CL2.5
> > pciide0 at pci0 dev 15 function 1 "ServerWorks CSB6 RAID/IDE" rev 0xa0: DMA
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus2 at atapiscsi0: 2 targets
> > cd0 at scsibus2 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.00> SCSI0 5/cdrom
> > removable
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> > ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: irq 9,
> > version 1.0, legacy support
> > pcib0 at pci0 dev 15 function 3 "ServerWorks GCLE-2 Host" rev 0x00
> > pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
> > pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
> > pci3 at pchb4 bus 2
> > bge0 at pci3 dev 0 function 0 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
> > (0x2002): irq 11, address 00:30:05:76:38:45
> > brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> > bge1 at pci3 dev 0 function 1 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
> > (0x2002): irq 10, address 00:30:05:76:38:46
> > brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> > pchb5 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
> > pchb6 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
> > pci4 at pchb6 bus 4
> > usb0 at ohci0: USB revision 1.0
> > uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pccom0: console
> > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > biomask f365 netmask ff65 ttymask ffe7
> > mtrr: Pentium Pro MTRR support
> > softraid0 at root
> > ahd0: target 0 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
> > ahd0: target 1 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
> > ahd0: target 2 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
> > dkcsum: sd0 matches BIOS drive 0x80
> > dkcsum: sd1 matches BIOS drive 0x81
> > dkcsum: sd2 matches BIOS drive 0x82
> > root on sd0a swap on sd0b dump on sd0b
> > swapctl: adding /dev/sd1b as swap device at priority 0
> > swapctl: adding /dev/sd2b as swap device at priority 0
> > Automatic boot in progress: starting file system checks.
>
OpenBSD 4.2-current (GENERIC.MP) #442: Sat Dec 8 22:01:54 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 536371200 (511MB)
avail mem = 510705664 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/10/04, BIOS32 rev. 0 @ 0xfd907, SMBIOS
rev. 2.31 @ 0xef360 (68 entries)
bios0: vendor FUJITSU SIEMENS // Phoenix Technologies Ltd. version "4.06 Rev.
1.12.1409" date 09/10/2004
bios0: FUJITSU SIEMENS D1409
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SPCR APIC BOOT
acpi0: wakeup devices PCI0(S4) USB_(S1) KEYB(S1) PS2M(S1) COM2(S4) COM1(S4)
PCIA(S4) PCIB(S4) PCIC(S4) PCID(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCIA)
acpiprt2 at acpi0: bus 2 (PCIB)
acpiprt3 at acpi0: bus 3 (PCIC)
acpiprt4 at acpi0: bus 4 (PCID)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1800 0xca800/0x9e00
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb1 bus 1
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci2 at pchb2 bus 3
ahd0 at pci2 dev 4 function 0 "Adaptec AIC-7902 U320" rev 0x03: apic 3 int 10
(irq 5)
ahd0: aic7902, U320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
scsibus0 at ahd0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAP3367NC, 5207> SCSI3 0/direct fixed
sd0: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAP3367NC, 5207> SCSI3 0/direct fixed
sd1: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
sd2 at scsibus0 targ 2 lun 0: <FUJITSU, MAP3367NC, 5207> SCSI3 0/direct fixed
sd2: 35046MB, 48122 cyl, 2 head, 745 sec, 512 bytes/sec, 71775284 sec total
safte0 at scsibus0 targ 8 lun 0: <SDR, GEM318, 0> SCSI2 3/processor fixed
ahd1 at pci2 dev 4 function 1 "Adaptec AIC-7902 U320" rev 0x03: apic 3 int 11
(irq 12)
ahd1: aic7902, U320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
scsibus1 at ahd1: 16 targets
vga1 at pci0 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB6" rev 0xa0: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x54: 256MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x55: 256MB DDR SDRAM registered ECC PC2300CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB6 RAID/IDE" rev 0xa0: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.00> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: apic 2 int 9
(irq 9), version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks GCLE-2 Host" rev 0x00
pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
pci3 at pchb4 bus 2
bge0 at pci3 dev 0 function 0 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): apic 3 int 2 (irq 11), address 00:30:05:76:38:45
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): apic 3 int 3 (irq 10), address 00:30:05:76:38:46
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pchb5 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb6 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci4 at pchb6 bus 4
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
ahd0: target 0 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
ahd0: target 1 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
ahd0: target 2 synchronous with period = 0x8, offset = 0x7f(DT|IU|QAS)
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
root on sd0a swap on sd0b dump on sd0b
