Hello all,
I've got a new DL320G5P to play with for a very short while, while I'm
waiting for the SAS controller cable to arrive (it's supposed to have
another OS on it, which shall remain nameless). So I have the luxury of
testing out this fine machine, but it doesn't boot under OpenBSD. It
hangs at the following point:
uhid at uhidev4 not configured
When entering the UKC prompt I can't type anything, only garbage comes out.
When I remove my USB keyboard and mouse, the kernel stops at:
uhub6 at uhub 1 port 2: HP Virtual Hub, rev 1.10/0.01, addr 3
So I used a linux distribution installer CD to gather some more information:
You can find these documents also at:
http://users.opengate.be/~glenn/dl320g5p/
-- dmesg --
Linux version 2.6.22-ARCH ([EMAIL PROTECTED]) (gcc version 4.2.1) #1 SMP
PREEMPT Wed Sep 26 21:45:47 CEST 2007
Command line: initrd=initrd.img rootdelay=5 BOOT_IMAGE=vmlinuz
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable)
BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data)
BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable)
BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000127fff000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 884326) 1 entries of 256 used
Entering add_active_range(0, 884334, 884335) 2 entries of 256 used
Entering add_active_range(0, 1048576, 1212415) 3 entries of 256 used
end_pfn_map = 1212415
DMI 2.4 present.
ACPI: RSDP 000F4F00, 0024 (r2 HP )
ACPI: XSDT D7E667C0, 0074 (r1 HP ProLiant 2 R 162E)
ACPI: FACP D7E66840, 00F4 (r3 HP ProLiant 2 R 162E)
ACPI: DSDT D7E66940, 2D59 (r1 HP DSDT 1 INTL 20030228)
ACPI: FACS D7E66100, 0040
ACPI: SPCR D7E66140, 0050 (r1 HP SPCRRBSU 1 R 162E)
ACPI: MCFG D7E661C0, 003C (r1 HP ProLiant 1 0)
ACPI: HPET D7E66200, 0038 (r1 HP ProLiant 2 R 162E)
ACPI: SPMI D7E66240, 0040 (r5 HP ProLiant 1 R 162E)
ACPI: ERST D7E66280, 01D0 (r1 HP ProLiant 1 R 162E)
ACPI: APIC D7E66480, 0092 (r1 HP ProLiant 2 0)
ACPI: FFFF D7E66540, 0176 (r1 HP ProLiant 1 R 162E)
ACPI: BERT D7E666C0, 0030 (r1 HP ProLiant 1 R 162E)
ACPI: HEST D7E66700, 00BC (r1 HP ProLiant 1 R 162E)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 884326) 1 entries of 256 used
Entering add_active_range(0, 884334, 884335) 2 entries of 256 used
Entering add_active_range(0, 1048576, 1212415) 3 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1212415
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 884326
0: 884334 -> 884335
0: 1048576 -> 1212415
On node 0 totalpages: 1048069
DMA zone: 56 pages used for memmap
DMA zone: 1116 pages reserved
DMA zone: 2827 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 865951 pages, LIFO batch:31
Normal zone: 2239 pages used for memmap
Normal zone: 161600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000d7e66000 - 00000000d7e6e000
swsusp: Registered nosave memory region: 00000000d7e6f000 - 00000000d8000000
swsusp: Registered nosave memory region: 00000000d8000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 33800 bytes of per cpu data
Built 1 zonelists. Total pages: 1030378
Kernel command line: initrd=initrd.img rootdelay=5 BOOT_IMAGE=vmlinuz
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 2659.998 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x5710000 - 0x9710000
Memory: 4018664k/4849660k available (2694k kernel code, 173000k
reserved, 1008k data, 248k init)
Calibrating delay using timer specific routine.. 5325.70 BogoMIPS
(lpj=8871528)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Using local APIC timer interrupts.
result 20781226
Detected 20.781 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5322.65 BogoMIPS
(lpj=8866640)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU 3075 @ 2.66GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=9
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE.BCME._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
PCI: Bridge: 0000:18:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:15:00.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: f0000000-f00fffff
PCI: Bridge: 0000:00:01.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: f0000000-f00fffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: fde00000-fdefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: fde00000-fdefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
Time: tsc clocksource has been installed.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 2000-3fff
MEM window: fdc00000-fddfffff
PREFETCH window: d8000000-dfffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:15:00.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 29810k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:02.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 248k freed
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI: Thermal Zone [THM0] (8 C)
libata version 2.21 loaded.
HP CISS Driver (v 3.6.14)
ACPI: PCI Interrupt 0000:18:08.0[A] -> GSI 16 (level, low) -> IRQ 16
cciss0: <0x3238> at PCI 0000:18:08.0 IRQ 16 using DAC
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x0000000000011080 ctl 0x000000000001108a
bmdma 0x00000000000110a0 irq 20
ata2: SATA max UDMA/133 cmd 0x0000000000011090 ctl 0x000000000001109a
bmdma 0x00000000000110a8 irq 20
ata1.00: ATA-7: ST3250620NS, 3BJP, max UDMA/133
ata1.00: 488397168 sectors, multi 8: LBA48
ata1.00: configured for UDMA/133
ata2.00: ATA-7: ST3250620NS, 3BJP, max UDMA/133
ata2.00: 488397168 sectors, multi 8: LBA48
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3250620NS n/a PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3250620NS n/a PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x00000000000110c0 ctl 0x00000000000110ca
bmdma 0x00000000000110e0 irq 20
ata4: SATA max UDMA/133 cmd 0x00000000000110d0 ctl 0x00000000000110da
bmdma 0x00000000000110e8 irq 20
ata3.00: ATAPI: DV-28E-V, C.AB, max UDMA/33
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM TEAC DV-28E-V C.AB PQ: 0 ANSI: 5
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit)
10/100/1000Base-T Ethernet 00:1c:c4:0d:c2:50
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76148000] dma_mask[40-bit]
ACPI: PCI Interrupt 0000:03:04.1[B] -> GSI 17 (level, low) -> IRQ 17
eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit)
10/100/1000Base-T Ethernet 00:1c:c4:0d:c2:51
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76148000] dma_mask[40-bit]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfdbf0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 23, io base 0x00003800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-2: new low speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usb 6-2: new full speed USB device using uhci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
usb 6-1: USB disconnect, address 2
usb 6-1: new full speed USB device using uhci_hcd and address 4
usb 6-1: configuration #1 chosen from 1 choice
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sdb:
sd 1:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usbcore: registered new interface driver hiddev
input: BTC USB Multimedia Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on
usb-0000:00:1d.2-1
input: BTC USB Multimedia Keyboard as /class/input/input3
input,hiddev0: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on
usb-0000:00:1d.2-1
input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.2-2
input: HP Virtual Keyboard as /class/input/input5
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input6
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid5: automatically using best checksumming function: generic_sse
generic_sse: 9812.400 MB/sec
raid5: using function: generic_sse (9812.400 MB/sec)
raid6: int64x1 2395 MB/s
raid6: int64x2 3058 MB/s
raid6: int64x4 3111 MB/s
raid6: int64x8 2438 MB/s
raid6: sse2x1 4721 MB/s
raid6: sse2x2 5504 MB/s
raid6: sse2x4 8032 MB/s
raid6: using algorithm sse2x4 (8032 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
PM: Writing back config space on device 0000:03:04.0 at offset c (was
8b100000, writing 0)
PM: Writing back config space on device 0000:03:04.0 at offset 3 (was
804000, writing 804010)
PM: Writing back config space on device 0000:03:04.0 at offset 1 (was
2b00000, writing 2b00146)
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
-- lspci --
00:00.0 Host bridge: Intel Corporation Server DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation Server Host-Primary PCI Express
Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation Server Host-Secondary PCI Express
Bridge (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller (rev 02)
01:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights
Out Controller (rev 03)
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights
Out Processor (rev 03)
01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual
USB controller
01:04.6 Serial bus controller [0c07]: Hewlett-Packard Company Proliant
iLO2 virtual UART
02:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5)
03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715
Gigabit Ethernet (rev a3)
03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715
Gigabit Ethernet (rev a3)
15:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b4)
18:04.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev b2)
18:08.0 RAID bus controller: Hewlett-Packard Company Smart Array E200i
(SAS Controller)
-- lsusb --
Bus 006 Device 004: ID 03f0:1027 Hewlett-Packard
Bus 006 Device 001: ID 0000:0000
Bus 006 Device 003: ID 03f0:1327 Hewlett-Packard
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 004 Device 002: ID 046d:c310 Logitech, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
-- /proc/cpuinfo --
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU 3075 @ 2.66GHz
stepping : 11
cpu MHz : 2659.998
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm
constant_tsc pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 5325.70
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU 3075 @ 2.66GHz
stepping : 11
cpu MHz : 2659.998
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm
constant_tsc pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 5322.65
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
