apm overrides acpi. If you want to run acpi disable apm at boot time.
b bsd -c
disable apm
quit
On Mon, Jan 07, 2008 at 09:13:27AM +0100, Markus Bergkvist wrote:
> Markus Bergkvist wrote:
>> Pierre Riteau wrote:
>>> I noticed that increasing the delay in sys/dev/pci/nviic.c from 100
>>> to 500 fixes this problem but I haven't took the time to file a bug
>>> report yet.
>> Seems to work here too.
>>
> Just increasing the delay doesn't work here any longer on a recent
> -current, have tested increasing it to 5000 even. Anyone else
> experiencing this?
> dmesg below.
>
>
> /Markus
>
>
> OpenBSD 4.2-current (GENERIC) #2: Sun Jan 6 18:06:15 CET 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) XP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache)
> 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 1073250304 (1023MB)
> avail mem = 1029881856 (982MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xfb470,
> SMBIOS rev. 2.2 @ 0xf0000 (43 entries)
> bios0: vendor Phoenix Technologies, LTD version "ASUS A7N8X Deluxe ACPI
> BIOS Rev 1008" date 09/14/2004
> bios0: ASUSTeK Computer INC. A7N8X
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
> pcibios0: PCI Exclusive IRQs: 5 11 12
> pcibios0: no compatible PCI ICU found
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4000! 0xd4000/0x1800 0xd6000/0x800
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2
> agp at pchb0 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
> "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa3
> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
> iic0 at nviic0
> spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
> spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC2700CL2.5
> iic1 at nviic0
> asbtm0 at iic1 addr 0x2d
> wbenv0 at iic1 addr 0x2e: W83L785TS-L
> lm1 at iic1 addr 0x2f: W83791D
> iic1: addr 0x48 00=7f 01=00 02=4b 04=7f 05=08 06=4b 08=7f 09=08 0a=4b
> 0b=50 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b
> 1b=50 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b
> 2b=50 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b
> 3b=50 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 4a=4b 4b=50
> 4d=08 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 ca=4b cc=7f cd=08
> ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d8=7f da=4b db=50 dc=7f
> de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50 e8=7f ea=4b eb=50 ec=7f
> ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50 f8=7f fa=4b fb=50 fc=7f
> fe=4b ff=50 words 00=ffff 01=08ff 02=4b00 03=5000 04=7f00 05=08ff
> 06=4b00 07=5000 08=7f00 09=08ff 0a=4b00 0b=5000 0c=7f00 0d=08ff 0e=4b00
> 0f=5000
> iic1: addr 0x49 02=4b 03=50 06=4b 08=33 0a=4b 0d=00 0e=4b 0f=50 11=00
> 12=4b 15=00 16=4b 17=50 1a=4b 1b=50 1e=4b 1f=50 22=4b 24=33 26=4b 28=33
> 2a=4b 2c=33 2e=4b 31=00 32=4b 33=50 36=4b 37=50 39=00 3a=4b 3c=33 3e=4b
> 41=00 42=4b 43=50 46=4b 47=50 48=33 4b=50 4d=00 4e=4b 4f=50 50=33 53=50
> 54=33 57=50 58=33 5b=50 5d=00 5e=4b 5f=50 62=4b 63=50 67=50 68=33 6b=50
> 6d=00 6e=4b 6f=50 72=4b 74=33 76=4b 79=00 7a=4b 7b=50 7e=4b 7f=50 82=4b
> 84=33 86=4b 88=33 8a=4b 8d=00 8e=4b 8f=50 92=4b 94=33 96=4b 99=00 9a=4b
> 9b=50 9e=4b a0=33 a2=4b a4=33 a6=4b a9=00 aa=4b ab=50 ae=4b af=50 b2=4b
> b4=33 b5=00 b6=4b ba=4b bb=50 be=4b c0=33 c2=4b c4=33 c6=4b c9=00 ca=4b
> cb=50 ce=4b cf=50 d2=4b d3=50 d6=4b d8=33 da=4b dc=33 de=4b e0=33 e1=00
> e2=4b e6=4b e7=50 ea=4b eb=50 ee=4b ef=50 f2=4b f4=33 f6=4b f8=33 fa=4b
> fc=33 fe=4b words 00=ffff 01=00ff 02=4b00 03=5000 04=3300 05=00ff
> 06=4b00 07=5000 08=3300 09=00ff 0a=4b00 0b=5000 0c=3300 0d=00ff 0e=4b00
> 0f=5000
> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa3: irq 12,
> version 1.0, legacy support
> ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa3: irq 12,
> version 1.0, legacy support
> ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa3: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
> nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11,
> address 00:e0:18:f7:72:4f
> rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
> "NVIDIA nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
> auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 11,
> nForce2 AC97
> ac97: codec id 0x414c4720 (Avance Logic ALC650)
> ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
> audio0 at auich0
> ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
> pci1 at ppb0 bus 1
> "ESS ES2898 Modem" rev 0x03 at pci1 dev 10 function 0 not configured
> pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <IC35L120AVV207-1>
> wd0: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-48246S, SS0A> SCSI0 5/cdrom
> removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi1 at pciide0 channel 1 drive 0
> scsibus1 at atapiscsi1: 2 targets
> cd1 at scsibus1 targ 0 lun 0: <LITE-ON, DVDRW SOHW-1693S, KS02> SCSI0
> 5/cdrom removable
> cd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
> ppb1 at pci0 dev 12 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
> pci2 at ppb1 bus 2
> xl0 at pci2 dev 1 function 0 "3Com 3c9201 100Base-TX" rev 0x40: irq 12,
> address 00:26:54:09:fc:39
> acphy0 at xl0 phy 2: AC101L 10/100 PHY, rev. 1
> ppb2 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2
> pci3 at ppb2 bus 3
> vga1 at pci3 dev 0 function 0 "ATI Radeon 9500 Pro" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> vendor "ATI", unknown product 0x4e65 (class display subclass
> miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
> biomask ff65 netmask ff65 ttymask ffe7
> mtrr: Pentium Pro MTRR support
> uhub3 at uhub2 port 2 "Texas Instruments TUSB2046 hub" rev 1.10/1.25 addr 2
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech HID
> compliant keyboard" rev 1.10/1.80 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech HID
> compliant keyboard" rev 1.10/1.80 addr 3
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhidev2 at uhub3 port 2 configuration 1 interface 0 "Logitech USB
> RECEIVER" rev 1.10/25.10 addr 4
> uhidev2: iclass 3/1
> ums0 at uhidev2: 16 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> uhidev3 at uhub3 port 3 configuration 1 interface 0 "Justcom Technology
> USB KVM Switch" rev 1.10/1.00 addr 5
> uhidev3: no report descriptor
> uhidev4 at uhub3 port 3 configuration 1 interface 1 "Justcom Technology
> USB KVM Switch" rev 1.10/1.00 addr 5
> uhidev4: iclass 3/1
> ums1 at uhidev4: 3 buttons and Z dir.
> wsmouse1 at ums1 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> auich0: measured ac97 link rate at 47995 Hz, will use 48000 Hz
