<snip>
Sorry, wrong dmesg. This is the right one:
OpenBSD 4.2-stable (GENERIC) #1: Fri Jan 18 21:26:06 CET 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron(tm) processor ("AuthenticAMD" 686-class, 64KB L2 cache) 754
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR
real mem = 536375296 (511MB)
avail mem = 511008768 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/28/03, BIOS32 rev. 0 @ 0xfb4b0,
SMBIOS rev. 2.2 @ 0xf0800 (45 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 08/28/2003
bios0: VIA Technologies, Inc. KT333-8235
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf74
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci0 dev 8 function 0 "S3 Trio32/64" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
dc0 at pci0 dev 10 function 0 "DEC 21142/3" rev 0x41: irq 10, address
00:80:c8:93:f9:00
amphy0 at dc0 phy 8: Am79C873 10/100 PHY, rev. 0
dc1 at pci0 dev 12 function 0 "Accton EN2242" rev 0x11: irq 11, address
00:04:e2:7b:0c:62
ukphy0 at dc1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000749, model 0x0001
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 11
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
maxtmp0 at iic0 addr 0x4c: lm90
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi XX.V.3.4.0.0>
wd0: 1-sector PIO, LBA, 488MB, 1000944 sectors
wd0(pciide0:0:0): using PIO mode 0
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
