Below dmesg:
OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686-class) 2.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 1068400640 (1018MB)
avail mem = 1027047424 (979MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries)
bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
bios0: Dell Inc. PowerEdge 1950
acpi0 at bios0: rev 2, can't enable ACPI
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00
0xcc000/0x5e00 0xec000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell
PERC 6/i integrated: irq 5
mfi0: firmware stuck in state 0
mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12
pci8 at ppb7 bus 10
bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): irq 5, address 00:10:18:31:68:d0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
pci10 at ppb9 bus 12
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 14
vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
-snip-
2008/1/25, Marco Peereboom <[EMAIL PROTECTED]>:
> I added the pci ids but it obviously didn't work. Can you send me the
> dmesg?
>
> On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote:
> > Hi,
> >
> > Just got this machine from Dell.
> > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not
> > recognize the raid1 disk.
> > Any idea when Perc 6i will be added?
> >
> > ---
> > Thanks
> > JW
