Hello, I want add one or several serial / rs232 connectors on a OpenBSD box (Soekris or standard PC) - without adding a PCI card - just converter. I search compatibles products. When we buy product we don't know the chip.
Do you have good experiences ? I have an converter, here an excerpt dmesg and usbdevs : ---------------- uftdi0 at uhub0 port 2 uftdi0: FTDI FT232R USB UART, rev 2.00/6.00, addr 3 ucom0 at uftdi0 portno 1 ---------------- # usbdevs -dv Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 uhub0 port 1 addr 2: low speed, power 100 mA, config 1, NetScroll(0x0035), Genius(0x0458), rev 1.10 uhidev0 port 2 addr 3: full speed, power 90 mA, config 1, FT232R USB UART(0x6001), FTDI(0x0403), rev 6.00 uftdi0 --------------------- I think tJhe FT232R USB UART is the /dev/ttyU0 device. But I can't talk witj it (in or out). # stty -f /dev/ttyU0 ispeed 0 baud; ospeed 9600 baud; lflags: echoe echoke echoctl cflags: cs8 -parenb Any ideas ? On another box I was using tip for receiving caracters. Xavier.