You forgot to say which version of OpenBSD you're using.
halt -p works fine on my amd64 using -current.
Yep, you've all the reason. Here is dmesg:
$ dmesg
OpenBSD 4.2-stable (GENERIC) #0: Thu Feb 14 18:44:44 CET 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3756511232 (3582MB)
avail mem = 3635011584 (3466MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.51 @ 0xdfeeb000 (30 entries)
bios0: vendor Phoenix Technologies LTD version "6.00" date 05/07/2007
bios0: Supermicro PDSMU
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(R) CPU 3060 @ 2.40GHz, 2394.27 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06: irq
7, address 00:15:17:4b:0f:4b
ppb1 at pci0 dev 3 function 0 vendor "Intel", unknown product 0x277a rev
0xc0
pci2 at ppb1 bus 6
em1 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06: irq
7, address 00:15:17:4b:0f:47
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 9
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 13
em2 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq
7, address 00:30:48:8c:a1:12
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 14
em3 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: irq
11, address 00:30:48:8c:a1:13
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 7
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 15
vga1 at pci6 dev 0 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 1 drive 0: <WDC WD2500YS-01SHB1>
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
iic0 at ichiic0: disabled to avoid ipmi0 interactions
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
umass0 at uhub0 port 7 configuration 1 interface 0
umass0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <PepperC, Virtual Disc 1, 0.01> SCSI3
5/cdrom removable
uhidev0 at uhub0 port 7 configuration 1 interface 1
uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0
ums0 at uhidev0
ums0: X report 0x0022 not supported
uhidev1 at uhub0 port 7 configuration 1 interface 2
uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
Maybe in next release it will work.
--
Thanks,
Jordi Espasa Clofent
