On Wed, Feb 27, 2008 at 7:38 PM, xSAPPYx <[EMAIL PROTECTED]> wrote: > Heya misc: > > Base dhcpd and named are failing to start after an update. I'm really > confused at this point. Other daemons are working fine and I can't see > anything else 'wrong' with the system. Any thoughts at all would be > greatly appreciated. > > This was a 4.2-release system. I followed the standard process (build > kernel, reboot, build userland). I've done it twice now figuring I > screwed something up (which i still believe) > > I updated my source tree with: > cvs -d$CVSROOT update -rOPENBSD_4_2 -Pd src > cvs -d$CVSROOT update -rOPENBSD_4_2 -Pd ports > > > Here is a snippit of /var/log/messages during bootup: > Feb 27 15:54:49 vash named[21321]: starting BIND 9.3.4 > Feb 27 15:54:50 vash named[21321]: > /usr/src/usr.sbin/bind/lib/isc/unix/ifiter_getifaddrs.c:107: > INSIST(ifa != 0L) failed > Feb 27 15:54:50 vash named[21321]: exiting (due to assertion failure) > Feb 27 15:54:51 vash savecore: no core dump > Feb 27 15:54:52 vash dhcpd: Can't listen on bge0 - it has no IP address. > Feb 27 15:54:52 vash dhcpd: No interfaces to listen on. > Feb 27 15:54:52 vash dhcpd: exiting. > Feb 27 15:54:54 vash squid[3353]: Squid Parent: child process 19826 started > > > Trying to start named and dhcpd manually we get: > > root:/root/scripts:8# named -f -g -d7 > Starting privilege seperation > 27-Feb-2008 16:32:47.378 starting BIND 9.3.4 -f -g -d7 > 27-Feb-2008 16:32:47.381 loading configuration from '/etc/named.conf' > 27-Feb-2008 16:32:47.397 set maximum stack size to 33554432: success > 27-Feb-2008 16:32:47.397 set maximum data size to 1073741824: success > 27-Feb-2008 16:32:47.397 set maximum core size to 9223372036854775807: > success > 27-Feb-2008 16:32:47.397 set maximum open files to 1024: success > 27-Feb-2008 16:32:47.397 > /usr/src/usr.sbin/bind/lib/isc/unix/ifiter_getifaddrs.c:107: > INSIST(ifa != 0L) failed > 27-Feb-2008 16:32:47.397 exiting (due to assertion failure) > > root:/root/scripts:9# dhcpd -d -f > No interfaces to listen on. > exiting. > root:/root/scripts:10# > > > Random pieces of possibly useful output follow > > root:/root/scripts:7# ifconfig -a > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33168 > groups: lo > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:0a:e4:26:dd:30 > description: Internal to my cube > media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause) > status: active > inet 192.168.24.5 netmask 0xffffff00 broadcast 192.168.24.255 > inet6 fe80::20a:e4ff:fe26:dd30%bge0 prefixlen 64 scopeid 0x1 > em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:11:0a:60:0d:82 > description: Lans Scare Me > groups: egress > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet 10.100.7.38 netmask 0xffffff00 broadcast 10.100.7.255 > inet6 fe80::211:aff:fe60:d82%em0 prefixlen 64 scopeid 0x2 > em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:11:0a:60:0d:83 > media: Ethernet autoselect (none) > status: no carrier > enc0: flags=0<> mtu 1536 > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33168 > groups: pflog > > > root:/root/scripts:3# uname -a > OpenBSD vash.copart.com 4.2 GENERIC#2 amd64 > > > root:/root/scripts:5# cat /var/run/dmesg.boot > OpenBSD 4.2-stable (GENERIC) #2: Wed Feb 27 14:31:04 PST 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 1609551872 (1534MB) > avail mem = 1549684736 (1477MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.33 @ 0xefeb0 (37 entries) > bios0: vendor Sun Microsystems version "R01-B5 S1" date 09/29/2006 > bios0: Sun Microsystems W1100z/2100z > acpi at mainbus0 not configured > cpu0 at mainbus0: (uniprocessor) > cpu0: AMD Opteron(tm) Processor 144, 1795.14 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3 > DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required > pci0 at mainbus0 bus 0: configuration mode 1 > ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07 > pci1 at ppb0 bus 1 > ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 11, > version 1.0, legacy support > ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 11, > version 1.0, legacy support > ohci2 at pci1 dev 3 function 0 "NEC USB" rev 0x43: irq 10, version > 1.0, legacy support > ohci3 at pci1 dev 3 function 1 "NEC USB" rev 0x43: irq 11, version > 1.0, legacy support > ehci0 at pci1 dev 3 function 2 "NEC USB" rev 0x04: irq 5 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0: NEC EHCI root hub, rev 2.00/1.00, addr 1 > "TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 4 function 0 not configured > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2: AMD OHCI root hub, rev 1.00/1.00, addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3: NEC OHCI root hub, rev 1.00/1.00, addr 1 > usb4 at ohci3: USB revision 1.0 > uhub4 at usb4: NEC OHCI root hub, rev 1.00/1.00, addr 1 > pcib0 at pci0 dev 7 function 0 "AMD 8111 LPC" rev 0x05 > pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel > 0 configured to compatibility, channel 1 configured to > compatibility > wd0 at pciide0 channel 0 drive 0: <HDS722580VLAT20> > wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <AOPEN, COM5232/AAH, 1.06> SCSI0 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > amdiic0 at pci0 dev 7 function 2 "AMD 8111 SMBus" rev 0x02: SCI > iic0 at amdiic0 > adt0 at iic0 addr 0x2e: adt7467 rev 0x71 > amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active > iic1 at amdpm0 > auich0 at pci0 dev 7 function 5 "AMD 8111 AC97" rev 0x03: irq 11, AMD8111 > AC97 > ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) > audio0 at auich0 > ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12 > pci2 at ppb1 bus 2 > "AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured > ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12 > pci3 at ppb2 bus 3 > bge0 at pci3 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2 > (0x1002): irq 5, address 00:0a:e4:26:dd:30 > brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > "AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev > 0x00pci4 at pchb0 bus 8 > pchb1 at pci4 dev 0 function 0 "AMD 8151 Sys Control" rev 0x14 > ppb3 at pci4 dev 1 function 0 "AMD 8151 AGP" rev 0x14 > pci5 at ppb3 bus 9 > vga1 at pci5 dev 0 function 0 "NVIDIA Quadro FX 500/600" rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb4 at pci4 dev 3 function 0 "AMD 8131 PCIX" rev 0x12 > pci6 at ppb4 bus 14 > "Marvell Libertas 88W8300" rev 0x07 at pci6 dev 1 function 0 not configured > "AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 3 function 1 not configured > ppb5 at pci4 dev 4 function 0 "AMD 8131 PCIX" rev 0x12 > pci7 at ppb5 bus 19 > em0 at pci7 dev 3 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: > irq 5, address 00:11:0a:60:0d:82 > em1 at pci7 dev 3 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: > irq 11, address 00:11:0a:60:0d:83 > "AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 4 function 1 not configured > > pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhidev0 at uhub3 port 1 configuration 1 interface 0 > uhidev0: Microsoft Comfort Curve Keyboard 2000, rev 2.00/1.73, addr 2, > iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 1 configuration 1 interface 1 > uhidev1: Microsoft Comfort Curve Keyboard 2000, rev 2.00/1.73, addr 2, > iclass 3/0 > uhidev1: 1 report ids > uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0 > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a swap on wd0b dump on wd0b > >
For the dhcpd, /etc/dhcpd.interfaces is ok? or try 'dhcpd bge0' ? For named, you're using /etc/named.conf instead of /var/named/etc/named.conf? As for bge0, I don't have Gb NICs so I don't know if the rxpause/txpause is normal? I'm curious to know though. 1000baseT full-duplex,rxpause,txpause
