Thanks for the responses. I tried lowering the MTU and disabling vjcomp. This
did improve the situation but still has not completely fixed the problem.
Websites and normal network content is now properly accessible but I noticed
that it is consistently half the speed it is on windows. I tried the cnet
bandwidth meter, when I get 300 kbps on windows, its about 150 on OpenBSD. When
I get 600 on windows, about 300 on OpenBSD. I've tried changing around the MTU
up and down and by trial and error found that I get the fastest speed at about
1000. I have tried vjcomp on and off and it doesn't really seem to change
anything. I have also tried changing the speed in ppp.conf but that doesn't
seem to change anything either. Any ideas how to get this umsm device running
up to full available speed?
Thanks so much
new /etc/ppp/ppp.conf
default:
set device /dev/cuaU0
disable vjcomp
set speed 921600
set mtu max 1000
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK
\\dATDT\\T TIMEOUT 40 CONNECT"
set phone "#777"
set login
set authname 3473724891vzw3g.com
set authkey vzw
set timeout 120
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
0.0.0.0
add default HISADDR
enable dns
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
