Hello Peter,
After I nfsen -r live command, statistics table changed to like below.
Statistics timeslot Mar 14 2008 - 11:15
Channel: Flows: Packets: Traffic:
all: tcp: udp: icmp: other: all: tcp: udp: icmp: other: all: tcp: udp:
icmp: other:
boldsoft_railcom 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0
/s 0 b/s 0 b/s 0 b/s 0 b/s 0 b/s
boldsoft_dial 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s
0 b/s 0 b/s 0 b/s 0 b/s 0 b/s
boldsoft_voip 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s
0 b/s 0 b/s 0 b/s 0 b/s 0 b/s
boldsoft_tower 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s 0 /s
0 b/s 0 b/s 0 b/s 0 b/s 0 b/s
Display: Sum Rate
Any configuration problem?
Balgaa
Richard Daemon wrote:
>
> Hi,
>
> I'm really stumped on this and any help would be greatly appreciated.
>
> When trying to load the nfsen/nfsen.php page I get:
>
> ERROR: nfsend connect() error: No such file or directory!
> ERROR: nfsend - connection failed!!
> ERROR: Can not initialize globals!
>
> I'm sure I have it configured properly and started properly as the
> documentation states, I've read over and over and over again...
>
> I've used the default ./etc/nfsen-dist.conf > ./etc/nfsen.conf (tried
> with and without changing HTMLDIR)
>
> I'm running httpd -u (non-chroot), php enabled, configured in
> httpd.conf and tested ok - httpd chrooted works less, for now.
>
> I did the mkdir /data then ran the ./install.pl etc/nfsen.conf
>
> Started it with: ./nfsen start and it starts ok.
>
> in nfsen.conf I tried with /var/www/nfsen and /var/www/htdocs/nfsen
> (same results)...
>
> %sources = (
> #'upstream1' => { 'port' => '9995', 'col' => '#0000ff',
> 'type' => 'netflow' },
> 'slacker' => { 'port' => '9995', 'col' => '#0000ff', 'type'
> => 'netflow' },
> #'peer1' => { 'port' => '9996', 'col' => '#ff0000' },
> );
>
> Then when I try http://slacker/nfsen/nfsen.php I get:
>
> ERROR: nfsend connect() error: No such file or directory!
> ERROR: nfsend - connection failed!!
> ERROR: Can not initialize globals!in red.
>
> pfflowd -d -n 192.168.0.10 running from remote host.
>
> I tried 1.3 and 1.3b, including nfsen -r live.
>
> I also get this in /var/log/messages:
> Feb 16 22:50:15 slacker nfsen[689]: Error reading channel stat
> information. Missing key 'first'
>
> $ netstat -anf inet |grep 995
> udp 0 0 *.9995 *.*
>
> Running OpenBSD 4.2-stable.
>
> Did I miss anything? Am I doing something wrong?
>
> Any help is greatly appreciated!
>
>
>
--
View this message in context:
http://www.nabble.com/Nfsen-and-php-problems...--tp15526200p16044913.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
