I received the same error on the march 31 bsd.rd. I was going to go home tonight and post info as I was trying to install latest snapshot @ around 11PM PDT last night...
I'm running a snapshot from March 24th on a dell Inspiron 9300 with no issues... I did "bsd.rd -c" and disabled uhub*, thinking that the bluetooth that is in the laptop was the issue, but I still received this issue... On Tue, Apr 1, 2008 at 7:51 AM, vladas <[EMAIL PROTECTED]> wrote: > Hi. I get this on booting bsd.rd. I have disable all bells in BIOS > leaving almost only pciide and serial. Playing with bsd -c did not > help either. What info should I provide next? > > >> OpenBSD/i386 BOOT 3.01 > boot> > booting hd0a:/bsd: 4995572+874168 [52+190496+176373]=0x5f2b6c > entry point at 0x200120* > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.3-current (RAMDISK_CD) #661: Sun Mar 30 23:52:04 MDT 2008 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.02 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16, > xTPR > real mem = 1064857600 (1015MB) > avail mem = 1023254528 (975MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 01/04/06, BIOS32 rev. 0 @ > 0xfb290, SMBIOS rev. 2.3 @ 0xf0100 (39 entries) > bios0: vendor Award Software International, Inc. version "F6" date 01/04/2006 > bios0: Gigabyte Technology Co., Ltd. 8I945G > apm0 at bios0: Power Management spec V1.2 > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd974 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd860/224 (12 entries) > pcibios0: PCI Exclusive IRQs: 5 10 11 12 > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GH LPC" rev 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xa800! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 11 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > pci2 at ppb1 bus 2 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > wd0 at pciide0 channel 0 drive 0: <FUJITSU MPE3084AE> > wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > "Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pccom0: console > biomask f7ed netmask f7ed ttymask ffef > rd0: fixed, 3800 blocks > uvm_fault(0xd06fe100, 0x0, 0, 1) -> e > fatal page fault (6) in supervisor mode > trap type 6 code 0 eip d02d0acf cs 8 eflags 10297 cr2 0 cpl 0 > panic: trap type 6, code=0, pc=d02d0acf > syncing disks... done > > dumping to dev 1101, offset 0 > dump error 19 > > rebooting...
