I also have ACPI problems on a HP notebook. Mine is a hp2510p,
and it kernel panics during boot. I have reported this to
[EMAIL PROTECTED] a few times.
For me it has worked to boot and crash,
UKC> trace
UKC> ps
UKC> boot reboot
boot with -c,
UKC> disable acpi
UKC> exit
and let it boot without ACPI. And magically, when booted,
the dmesg contains both boots; put it on e.g an USB key.
acpidump core dumps for mee too. I have sent in the
broken results as well as the core file. I do not
if someone is trying to solve the problem, though.
I have not tried the MP kernel.
On Thu, Apr 03, 2008 at 10:59:01AM +0200, Daniele Pilenga wrote:
> Hi guys,
> I have this notebook on which I'd like to install (and use!) OpenBSD,
> but I have a little problem.
>
> If I leave ACPI anabled, as per default on this Apr 1st snapshot, the
> /bsd kernel reboots after cpu probing
> (more or less, I don't have any serial so I cannot see very clearly,
> it's too fast) and the /bsd.mp kernel hangs at some
> acpi probing.
>
> Enabling verbose mode is not very helpful since it scrolls down too
> fast and in both cases rebooting the machine does not
> leave the dmesg in memory.
>
> I already tried disabling some random driver, but since I cannot see
> where the problem is I don't even know what to
> look for.
>
> It would not be that bad living without acpi, but the MP kernel cannot
> see both cpu cores, so I hope there is something
> I could try.
>
> It seems there is a problem with the audio, but I'll leave that for later. :-)
>
> Dmesg follows, please let me know if there is something else you need
> or if you have any suggestion.
> BTW, acpidump core dumps, but may be related to the non-acpi kernel.
>
> Thank you,
> D.
>
> OpenBSD 4.3-current (GENERIC) #732: Tue Apr 1 00:54:18 MDT 2008
>
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
>
> cpu0: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class) 2.17 GHz
>
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
>
> real mem = 2146856960 (2047MB)
>
> avail mem = 2067857408 (1972MB)
>
> User Kernel Config
>
> UKC> disable acpi
>
> 422 acpi0 disabled
>
> UKC> quit
>
> Continuing...
>
> mainbus0 at root
>
> bios0 at mainbus0: AT/286+ BIOS, date 03/05/08, BIOS32 rev. 0 @
> 0xf0000, SMBIOS rev. 2.4 @ 0xf3b77 (23 entries)
>
> bios0: vendor Hewlett-Packard version "68YAF Ver. F.1C" date 03/05/2008
>
> bios0: Hewlett-Packard HP Compaq nw9440 (EY314EA#ABZ)
>
> acpi at bios0 function 0x0 not configured
>
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
>
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/208 (11 entries)
>
> pcibios0: bad IRQ table checksum
>
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9990/208 (11 entries)
>
> pcibios0: PCI Exclusive IRQs: 5 10 11
>
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
>
> pcibios0: PCI bus #32 is the last bus
>
> bios0: ROM list: 0xc0000/0xdc00 0xd0000/0x1000 0xd1000/0x1800
>
> cpu0 at mainbus0
>
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130d2c06000d2c
>
> cpu0: using only highest and lowest power states
>
> cpu0: Enhanced SpeedStep 2167 MHz (1404 mV): speeds: 2167, 1000 MHz
>
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
>
> ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
>
> pci1 at ppb0 bus 1
>
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x029b rev 0xa1
>
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>
> agp0 at vga1: no integrated graphics
>
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 10
>
> azalia0: codec[s]: Analog Devices/0x1981, Conexant/0x2bfa, using
> Analog Devices/0x1981
>
> audio0 at azalia0
>
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 10
>
> pci2 at ppb1 bus 8
>
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
> (0x4201): irq 10, address 00:16:d4:0c:fc:f0
>
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
>
> ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 10
>
> pci3 at ppb2 bus 16
>
> wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> irq 10, MoW2, address 00:13:02:51:af:9d
>
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: irq 5
>
> pci4 at ppb3 bus 32
>
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
>
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
>
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
>
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
>
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
>
> usb0 at ehci0: USB revision 2.0
>
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
>
> pci5 at ppb4 bus 2
>
> cbb0 at pci5 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: irq 11
>
> "TI PCIXX12 FireWire" rev 0x00 at pci5 dev 6 function 1 not configured
>
> "TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 6 function 2
> not configured
>
> sdhc0 at pci5 dev 6 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 11
>
> sdmmc0 at sdhc0
>
> "TI PCIXX12 Smart Card" rev 0x00 at pci5 dev 6 function 4 not configured
>
> cardslot0 at cbb0 slot 0 flags 0
>
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
>
> pcmcia0 at cardslot0
>
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
>
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
>
> atapiscsi0 at pciide0 channel 0 drive 0
>
> scsibus0 at atapiscsi0: 2 targets
>
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GMA-4082N, HQ04> SCSI0
> 5/cdrom removable
>
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
>
> pciide0: channel 1 ignored (disabled)
>
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10, AHCI
> 1.1
>
> scsibus1 at ahci0: 32 targets
>
> sd0 at scsibus1 targ 0 lun 0: <ATA, HTS721080G9SA00, MC4O> SCSI3 0/direct
> fixed
>
> sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
>
> usb1 at uhci0: USB revision 1.0
>
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>
> usb2 at uhci1: USB revision 1.0
>
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>
> usb3 at uhci2: USB revision 1.0
>
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>
> usb4 at uhci3: USB revision 1.0
>
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>
> isa0 at ichpcib0
>
> isadma0 at isa0
>
> pckbc0 at isa0 port 0x60/5
>
> pckbd0 at pckbc0 (kbd slot)
>
> pckbc0: using irq 1 for kbd slot
>
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>
> pmsi0 at pckbc0 (aux slot)
>
> pckbc0: using irq 12 for aux slot
>
> wsmouse0 at pmsi0 mux 0
>
> pcppi0 at isa0 port 0x61
>
> midi0 at pcppi0: <PC speaker>
>
> spkr0 at pcppi0
>
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>
> biomask effd netmask effd ttymask ffff
>
> mtrr: Pentium Pro MTRR support
>
> ugen0 at uhub1 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr
> 2
>
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Microsoft Basic
> Optical Mouse" rev 1.10/0.00 addr 2
>
> uhidev0: iclass 3/1
>
> ums0 at uhidev0: 3 buttons and Z dir.
>
> wsmouse1 at ums0 mux 0
>
> ugen1 at uhub1 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
>
> softraid0 at root
>
> root on sd0a swap on sd0b dump on sd0b
>
>
> Links:
> HP description:
> http://h10010.www1.hp.com/wwpc/us/en/sm/WF10a/321957-321957-64295-321838-3329741-1839859.html?jumpid=oc_R1002_USENC-001_HP%20Compaq%20nw9440%20Mobile%20Workstation&lang=en&cc=us
--
/ Raimo Niskanen, Erlang/OTP, Ericsson AB
