I hate to add to this thread, but I'm running a similar system and
experiencing similar "hangs", albeit on 4.2 release. Realing kind of
annoying because all I want from this system is to be a SQUID server,
and when the box crashes, the hard disk light will stay on like it's
throttling the hard drive for at least five minutes before I get too
impatient and pound on the reset button.
I'm going to try 2 things:
1) verify RAM memory timings across all modules and be sure to have
the most compatible settings in the BIOS
2) Try a snapshot
Installed Ports
isc-dhcp-server-3.0.4p0 ISC DHCP Server
libiconv-1.9.2p3 character set conversion library
rsync-2.6.9 mirroring/synchronization over low bandwidth links
squid-2.6.STABLE13 WWW and FTP proxy cache and accelerator
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.20GHz ("GenuineIntel" 686-class) 2.22 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073233920 (1023MB)
avail mem = 1030131712 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/05/03, BIOS32 rev. 0 @
0xf0e90, SMBIOS rev. 2.3 @ 0xf2ea0 (50 entries)
bios0: vendor Award Software, Inc. version "ASUS P4B266 ACPI BIOS
Revision 1011 Beta 003" date 06/05/2003
bios0: ASUSTeK Computer INC. P4B266
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x16e2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1600/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xb000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
cmpci0 at pci2 dev 3 function 0 "C-Media Electronics CMI8738/C3DX
Audio" rev 0x10: irq 5
audio0 at cmpci0
opl0 at cmpci0: model OPL3
midi0 at opl0: <CMPCI Yamaha OPL3>
mpu at cmpci0 not configured
ohci0 at pci2 dev 4 function 0 "NEC USB" rev 0x41: irq 5, version 1.0
ohci1 at pci2 dev 4 function 1 "NEC USB" rev 0x41: irq 9, version 1.0
ehci0 at pci2 dev 4 function 2 "NEC USB" rev 0x02: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NEC EHCI root hub, rev 2.00/1.00, addr 1
skc0 at pci2 dev 11 function 0 "Linksys EG1032" rev 0x12, Yukon (0x1): irq 9
sk0 at skc0 port A: address 00:0c:41:eb:c3:2b
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
skc1 at pci2 dev 12 function 0 "Linksys EG1032" rev 0x12, Yukon (0x1): irq 12
sk1 at skc1 port A: address 00:0c:41:eb:bc:7c
eephy1 at sk1 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NEC OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: NEC OHCI root hub, rev 1.00/1.00, addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05:
24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400JB-00ETA0>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4120B, 2.01> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 10
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 9
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb3 at uhci0: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci1: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
biomask ef65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
On 14/04/2008, Gregory Edigarov <[EMAIL PROTECTED]> wrote:
> Hello, Everybody.
>
> see dmesg in attachment
>
> it was rebuilt from sources i got from cvs last week.
>
> Hangs after some time of inactivity, when something heavy (like
> thunderbird) starts up, or just waking up from being swapped after
> quite a period of inactivity.
>
> Let me know, if you need some more info to diagnose the problem better.
>
> Thanks.
> --
> With best regards,
> Gregory Edigarov
> at 0xd0000000, size 0x8000000
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 12
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
> pci1 at ppb0 bus 3
> rl0 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: irq 3, address
> 00:0b:6a:f8:3e:e3
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 3, ICH4
> AC97
> ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ffe5 netmask ffed ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/11.10 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> syncing disks... done
> rebooting...
> OpenBSD 4.3 (GREG) #0: Fri Apr 11 11:46:35 EEST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GREG
> cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 259551232 (247MB)
> avail mem = 247164928 (235MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ 0xfdb30,
> SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
> bios0: vendor American Megatrends Inc. version "P2.60" date 12/17/2003
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xb400
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> agp0 at pchb0: aperture at 0xd0000000, size 0x8000000
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 12
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
> pci1 at ppb0 bus 3
> rl0 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: irq 3, address
> 00:0b:6a:f8:3e:e3
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 3, ICH4
> AC97
> ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ffe5 netmask ffed ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/11.10 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> panic: pool_do_get(amappl): free list modified: magic=efffaab9; page
> 0xd590c000; item addr 0xd590c2a0
> Stopped at
> OpenBSD 4.3 (GREG) #0: Fri Apr 11 11:46:35 EEST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GREG
> cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 259551232 (247MB)
> avail mem = 247164928 (235MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ 0xfdb30,
> SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
> bios0: vendor American Megatrends Inc. version "P2.60" date 12/17/2003
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xb400
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> agp0 at pchb0: aperture at 0xd0000000, size 0x8000000
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 12
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
> pci1 at ppb0 bus 3
> rl0 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: irq 3, address
> 00:0b:6a:f8:3e:e3
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 3, ICH4
> AC97
> ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ffe5 netmask ffed ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/11.10 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> syncing disks... done
> rebooting...
> OpenBSD 4.3 (GREG) #0: Fri Apr 11 11:46:35 EEST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GREG
> cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 259551232 (247MB)
> avail mem = 247164928 (235MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ 0xfdb30,
> SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
> bios0: vendor American Megatrends Inc. version "P2.60" date 12/17/2003
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xb400
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> agp0 at pchb0: aperture at 0xd0000000, size 0x8000000
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 12
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
> pci1 at ppb0 bus 3
> rl0 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: irq 3, address
> 00:0b:6a:f8:3e:e3
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 3, ICH4
> AC97
> ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ffe5 netmask ffed ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/11.10 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> panic: pool_do_get(anonpl): free list modified: magic=efffaab9; page
> 0xd590c000; item addr 0xd590c2a0
> Stopped at
> OpenBSD 4.3 (GREG) #0: Fri Apr 11 11:46:35 EEST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GREG
> cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 259551232 (247MB)
> avail mem = 247164928 (235MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ 0xfdb30,
> SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
> bios0: vendor American Megatrends Inc. version "P2.60" date 12/17/2003
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xb400
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> agp0 at pchb0: aperture at 0xd0000000, size 0x8000000
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 12
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
> pci1 at ppb0 bus 3
> rl0 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: irq 3, address
> 00:0b:6a:f8:3e:e3
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 3, ICH4
> AC97
> ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ffe5 netmask ffed ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/11.10 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
>
>
--
I know too much and yet not enough
