On Sat, May 03, 2008 at 12:04:53PM +0200, Ivo van der Sangen wrote:
> Hello,
>
> After upgrading my Thinkpad t42 to 4.3-stable I noticed that while I was
> logged
> in through XDM and I run "shutdown -hp now" the screen turns black and the
> system doesn't halt properly. After rebooting the root filesystem has to be
> checked for errors, so this clearly is a bad halt.
>
> OpenBSD 4.3 (CUSTOM) #0: Fri May 2 23:37:56 CEST 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/CUSTOM
> cpu0: Intel(R) Pentium(R) M processor 1.70GHz ("GenuineIntel" 686-class) 1.70
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,
> SS,TM,SBF,EST,TM2
> real mem = 804220928 (766MB)
> avail mem = 769052672 (733MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 07/27/05, BIOS32 rev. 0 @ 0xfd750,
> SMBIOS
> rev. 2.33 @ 0xe0
> 010 (61 entries)
> bios0: vendor IBM version "1RETDLWW (3.17 )" date 07/27/2005
> bios0: IBM 23733YG
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000!
> 0xe0000/0x10000
> cpu0 at mainbus0
> cpu0: Enhanced SpeedStep 1700 MHz (1340 mV): speeds: 1700, 1400, 1200, 1000,
> 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
> agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
> pci2 at ppb1 bus 2
> cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
> cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11,
> address 00:11:25:2f:
> a3:76
> ath0 at pci2 dev 2 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11
> ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR1W, address
> 00:05:4e:48:66:8c
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer
> at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel > 0
> configured to co
> mpatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0201> SCSI0 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
> AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask effd netmask effd ttymask ffff
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> WARNING: R/W mount of /home denied. Filesystem is not clean - run fsck
>
> Note: The same applies to a GENERIC kernel (I tested it).
>
> The system halts properly when I log out my X session and run the shutdown
> from
> a tty. I have no idea what is causing this and if it is suitable for a bug
> report.
>
> Regards,
>
> Ivo van der Sangen
>
I had some more time to test on the machine. It appears that a
pre-upgrade installation of xmonad was the problem. After recompiling
xmonad the problem is solved.
Regards,
Ivo van der Sangen
