Just FW,was send only to me not to misc
-----Original Message-----
From: Insan Praja SW [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 06, 2008 12:28 PM
To: Tomas Bodzar
Subject: Re: 1U IBM or Dell server for firewall
An IBM x3250 looks like this on dmesg:
OpenBSD 4.3-current (GENERIC.MP) #0: Thu Mar 13 05:46:13 WIT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145841152 (2046MB)
avail mem = 2072121344 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.33 @ 0x7fee2000 (29 entries)
bios0: vendor IBM version "IBM BIOS Version 1.35-[G9E135AUS-1.35]-" date
09/29/2 007
bios0: IBM IBM System x3250 -[436442A]-
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP MCFG APIC BOOT SPCR SSDT
acpi0: wakeup devices PEG_(S4) PEG2(S4) EXP1(S4) EXP5(S4) EXP6(S4)
PCIB(S4) COM1 (S4) COM2(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) EUSB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz, 1866.96 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
16,
xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz, 1866.73 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX
16,
xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 12 (PEG_)
acpiprt2 at acpi0: bus 6 (PEG2)
acpiprt3 at acpi0: bus 5 (EXP1)
acpiprt4 at acpi0: bus 1 (EXP5)
acpiprt5 at acpi0: bus 3 (EXP6)
acpiprt6 at acpi0: bus 26 (PCIB)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16
(irq 7)
pci1 at ppb0 bus 12
ppb1 at pci0 dev 3 function 0 "Intel 82975X PCIE" rev 0xc0: apic 2 int 16
(irq 7 )
pci2 at ppb1 bus 6
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int
17 (irq 10)
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17
(irq 10)
pci4 at ppb3 bus 1
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): apic 2 int 16 (irq
7), address 00:1a:64:6e:a0:9a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16
(irq 11)
pci5 at ppb4 bus 3
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): apic 2 int 17 (irq
10), address 00:1a:64:6e:a0:9b
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
16 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci6 at ppb5 bus 26
vga1 at pci6 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 wired to
compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HDS721616PLA380 IBM>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD-ROM TS-L162C, IB02> SCSI0
5/cdrom re movable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
int 19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x51: 512MB DDR2 SDRAM ECC PC2-5300CL5
spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM ECC PC2-5300CL5
spdmem3 at iic0 addr 0x53: 512MB DDR2 SDRAM ECC PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
insandotpraja(at)gmaildotcom
