Yes, just a little bit... The do seem slow, but I acknowledge the fact that the system bus could be choking a bit. The numbers that have been produced in other benchmarks are right around 100/80 read/write. I'm not entirely sure that the system board that I have is the greatest to achieve this on. The first time I ran bonnie++ on the 4.2 snapshot I had close to 16k interrupts. Ran out of time trying to pinpoint the bottleneck.
On Mon, Jun 16, 2008 at 9:37 AM, Marco Peereboom <[EMAIL PROTECTED]> wrote: > I am honestly curious, are you surprised by these results? > > On Sun, Jun 15, 2008 at 08:09:48PM -0400, Brandon Mercer wrote: >> Hello all. >> Well my raid 10 of 10k scsis just wasn't cutting it anymore so I >> decided to replace it with something interesting. I picked up an >> Mtron mobi 3000 solid state hard drive. This drive didn't come >> without issue. I poorly researched hardware and then had to >> substitute my mainboard choice when the local store was out of stock. >> Long story short the drive wound up on "cheap" board connecting to >> pciide. (One note: I had to upgrade from 4.2 snapshot to 4.3 -current >> in order to get any kind of performance from pciide) First thing I >> did, bonnie++ of course! >> >> Version 1.03 ------Sequential Output------ --Sequential Input- >> --Random- >> -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- >> --Seeks-- >> Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec >> %CP >> db1.eutonian.com 4G 61968 88 54228 52 33751 11 45898 75 87135 18 2076 >> 11 >> ------Sequential Create------ --------Random >> Create-------- >> -Create-- --Read--- -Delete-- -Create-- --Read--- >> -Delete-- >> files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec >> %CP >> 16 +++++ +++ +++++ +++ 29239 73 32630 63 +++++ +++ +++++ >> +++ >> db1.eutonian.com,4G,61968,88,54228,52,33751,11,45898,75,87135,18,2075.7,11,16,+++++,+++,+++++,+++,29239,73,32630,63,+++++,+++,+++++,+++ >> >> During this test pciide hung out around 3800-4200 interrupts. Dmesg follows. >> >> OpenBSD 4.3-current (GENERIC.MP) #1728: Sat Jun 14 20:01:03 MDT 2008 >> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 2066206720 (1970MB) >> avail mem = 2006016000 (1913MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.2 @ 0xf0000 (46 entries) >> bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/12/2007 >> acpi0 at bios0: rev 0 >> acpi0: tables DSDT FACP SSDT _HPT MCFG APIC >> acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) UAR1(S5) >> UAR2(S5) USB0(S3) USB2(S3) AZAD(S5) MMAC(S5) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2110.06 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW >> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB >> 64b/line 16-way L2 cache >> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu0: apic clock running at 200MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+, 2109.72 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW >> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB >> 64b/line 16-way L2 cache >> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative >> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins >> ioapic0: misconfigured as apic 0, remapped to apid 2 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 1 (HUB0) >> acpicpu0 at acpi0: PSS >> acpicpu1 at acpi0: PSS >> acpitz0 at acpi0: critical temperature 124 degC >> acpibtn0 at acpi0: PWRB >> cpu0: PowerNow! K8 2109 MHz: speeds: 2100 2000 1800 1000 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 >> "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured >> pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 >> nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 >> iic0 at nviic0 >> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 >> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 >> iic1 at nviic0 >> "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured >> "NVIDIA MCP61 SMU" rev 0xa2 at pci0 dev 1 function 3 not configured >> ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: apic 2 int >> 11 (irq 11), version 1.0, legacy support >> ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: apic 2 int 5 >> (irq 5) >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1 >> ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 >> pci1 at ppb0 bus 1 >> skc0 at pci1 dev 5 function 0 "D-Link Systems DGE-530T B1" rev 0x11, >> Yukon Lite (0x9): apic 2 int 5 (irq 5) >> sk0 at skc0 port A: address 00:1b:11:1a:2e:98 >> eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 >> ami0 at pci1 dev 6 function 0 "Symbios Logic MegaRAID" rev 0x01: apic >> 2 int 10 (irq 10) >> ami0: LSI 523, 32b, FW 713S, BIOS vG121, 64MB RAM >> ami0: 1 channels, 0 FC loops, 1 logical drives >> scsibus0 at ami0: 40 targets, initiator 40 >> sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed >> sd0: 915723MB, 116738 cyl, 255 head, 63 sec, 512 bytes/sec, 1875400704 sec >> total >> scsibus1 at ami0: 16 targets, initiator 16 >> pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, >> channel 0 configured to compatibility, channel 1 configured to >> compatibility >> pciide0: channel 0 disabled (no drives) >> pciide0: channel 1 ignored (disabled) >> nfe0 at pci0 dev 7 function 0 "NVIDIA MCP61 LAN" rev 0xa2: apic 2 int >> 10 (irq 10), address 00:19:21:fc:c2:5b >> ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI >> 0x0050ef, model 0x0007 >> pciide1 at pci0 dev 8 function 0 "NVIDIA MCP61 SATA" rev 0xa2: DMA >> pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt >> wd0 at pciide1 channel 1 drive 0: <MTRON MSD-SATA3035> >> wd0: 1-sector PIO, LBA, 15260MB, 31252480 sectors >> wd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 >> ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 >> pci2 at ppb1 bus 2 >> ppb2 at pci0 dev 11 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 >> pci3 at ppb2 bus 3 >> ppb3 at pci0 dev 12 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 >> pci4 at ppb3 bus 4 >> vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 405" rev 0xa2 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 >> pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 >> pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 >> kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: >> core rev BH-G1 >> isa0 at pcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> lpt0 at isa0 port 0x378/4 irq 7 >> it0 at isa0 port 0x2e/2: IT8726F rev 0x01, EC port 0x290 >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >> usb1 at ohci0: USB revision 1.0 >> uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1 >> mtrr: Pentium Pro MTRR support >> uhidev0 at uhub1 port 4 configuration 1 interface 0 "CHICONY HP Basic >> USB Keyboard" rev 1.10/3.00 addr 2 >> uhidev0: iclass 3/1 >> ukbd0 at uhidev0: 8 modifier keys, 6 key codes >> wskbd1 at ukbd0 mux 1 >> wskbd1: connecting to wsdisplay0 >> softraid0 at root >> root on wd0a swap on wd0b dump on wd0b >> >> >> Please CC me on replies as I'm not subscribed. Enjoy! >> Brandon
