during the lunch I've tried the i386 too and I can confirm the same problem.
so for summarizing:
snapshot 11/06 was ok
snapshot 19/06 is not ok
On Fri, Jun 20, 2008 at 09:40:08AM +0200, giovanni wrote:
>hello,
>
>recently I switched from i386 to amd64 w/ my laptop. I've not yet tried w/
>i386 (anyway until ~ 1 month ago it worked w/o troubles) but w/ amd64 I catch
>a systematic crash when rum sees traffic.
>
>kernel: protection fault trap code = 0
>stopped at bpf_mtap 0x20: movl 0x18(%rdx), %eax
>ddb{0}: trace
>
>ieee80211_input() at ieee80211_input() + 0x46c
>rum_rxeof() at rum_rxeof() + 0x1bf
>usb_transfer_complete() at usb_transfer_complete() + 0x1cc
>hci_softintr() at ehci_softintr() + 0x2f
>softintr_dispatch() at softintr_dispatch() + 0x6e
>Xsoftnet() at Xsoftnet() + 0x9a
>-- interrupt --
>end trace frame: 0x, count -3
>0:
>ddb{0}
>
>hostname.rum0:
>!ifconfig \$if lladdr `openssl rand 6 | hexdump -e '1/1 "%02x" ":"' | cut -d:
>-f1-6`
>inet 10.0.2.1 255.255.255.0 NONE media autoselect mode 11g mediaopt hostap
>nwid RUM wpa wpapsk <...>
>!dhcpd \$if
>!pkill -HUP named
>
>dmesg:
>OpenBSD 4.3-current (GENERIC.MP) #1735: Thu Jun 19 08:14:59 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>real mem = 1050845184 (1002MB)
>avail mem = 1020035072 (972MB)
>mainbus0 at root
>bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (18 entries)
>bios0: vendor Phoenix Technologies LTD version "R0034J4" date 02/26/2007
>bios0: Sony Corporation VGN-C1S_H
>acpi0 at bios0: rev 0
>acpi0: tables DSDT FACP APIC MCFG APIC BOOT SSDT SSDT
>acpi0: wakeup devices PWRB(S4) PXS1(S3) PXS2(S3) PXS3(S3) PXS4(S3) USB1(S3)
>USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S3)
>acpitimer0 at acpi0: 3579545 Hz, 24 bits
>acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>cpu0 at mainbus0: apid 0 (boot processor)
>cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.80 MHz
>cpu0:
>FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
>cpu0: 2MB 64b/line 8-way L2 cache
>cpu0: apic clock running at 166MHz
>cpu1 at mainbus0: apid 1 (application processor)
>cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz
>cpu1:
>FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
>cpu1: 2MB 64b/line 8-way L2 cache
>ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
>ioapic0: misconfigured as apic 2, remapped to apid 1
>acpiprt0 at acpi0: bus 0 (PCI0)
>acpiprt1 at acpi0: bus -1 (PEGP)
>acpiprt2 at acpi0: bus 2 (RP01)
>acpiprt3 at acpi0: bus 4 (RP02)
>acpiprt4 at acpi0: bus 6 (RP03)
>acpiprt5 at acpi0: bus 8 (RP04)
>acpiprt6 at acpi0: bus 10 (PCIB)
>acpiec0 at acpi0
>acpicpu0 at acpi0: C2, C1, PSS
>acpicpu1 at acpi0: C2, C1, PSS
>acpitz0 at acpi0: critical temperature 105 degC
>acpitz0: TZ00: failed to read _AC0
>acpitz1 at acpi0: critical temperature 105 degC
>acpitz1: TZ01: failed to read _AC0
>acpiac0 at acpi0: AC unit online
>acpibat0 at acpi0: BAT0 not present
>acpibtn0 at acpi0: LID0
>acpibtn1 at acpi0: PWRB
>acpidock at acpi0 not configured
>cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
>pci0 at mainbus0 bus 0: configuration mode 1
>pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
>vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>agp0 at vga1: aperture at 0xb0000000, size 0x10000000
>"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
>azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1
>int 22 (irq 4)
>azalia0: codec[s]: Realtek/0x0262, Conexant/0x2c06, using Realtek/0x0262
>audio0 at azalia0
>ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
>(irq 3)
>pci1 at ppb0 bus 2
>mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13, Yukon-2 FE
>(0x1): apic 1 int 16 (irq 7)
>msk0 at mskc0 port A: address 00:13:a9:60:1b:eb
>eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
>ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
>(irq 7)
>pci2 at ppb1 bus 4
>ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
>(irq 11)
>pci3 at ppb2 bus 6
>wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1
>int 18 (irq 11), MoW2, address 00:18:de:ad:3e:96
>ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
>(irq 10)
>pci4 at ppb3 bus 8
>uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
>(irq 5)
>uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
>(irq 3)
>uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
>(irq 11)
>uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
>(irq 7)
>ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
>(irq 5)
>usb0 at ehci0: USB revision 2.0
>uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
>pci5 at ppb4 bus 10
>cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 16
>(irq 255), CardBus support disabled
>"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 3 function 1 not configured
>"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2 not
>configured
>cardslot0 at cbb0 slot 0 flags 0
>pcmcia0 at cardslot0
>pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
>pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
>configured to compatibility, channel 1 configured to compatibility
>atapiscsi0 at pciide0 channel 0 drive 0
>scsibus0 at atapiscsi0: 2 targets, initiator 7
>cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> ATAPI 5/cdrom
>removable
>cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>pciide0: channel 1 ignored (disabled)
>pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
>0 configured to native-PCI, channel 1 configured to native-PCI
>pciide1: using apic 1 int 19 (irq 10) for native-PCI interrupt
>wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
>wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
>wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
>ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int
>19 (irq 10)
>iic0 at ichiic0
>spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
>spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
>usb1 at uhci0: USB revision 1.0
>uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>usb2 at uhci1: USB revision 1.0
>uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>usb3 at uhci2: USB revision 1.0
>uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>usb4 at uhci3: USB revision 1.0
>uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>isa0 at pcib0
>isadma0 at isa0
>pckbc0 at isa0 port 0x60/5
>pckbd0 at pckbc0 (kbd slot)
>pckbc0: using irq 1 for kbd slot
>wskbd0 at pckbd0: console keyboard, using wsdisplay0
>pms0 at pckbc0 (aux slot)
>pckbc0: using irq 12 for aux slot
>wsmouse0 at pms0 mux 0
>pcppi0 at isa0 port 0x61
>midi0 at pcppi0: <PC speaker>
>spkr0 at pcppi0
>mtrr: Pentium Pro MTRR support
>rum0 at uhub0 port 1 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
>rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0e:e8:e0:c4:17
>softraid0 at root
>root on wd0a swap on wd0b dump on wd0b
>wsdisplay0: screen 1 deleted
>wsdisplay0: screen 2 deleted
>wsdisplay0: screen 1 added (80x50, vt100 emulation)
>wsdisplay0: screen 2 added (80x50, vt100 emulation)
>ehci_idone: ex=0xffff80000027ab00 is done!
>ehci_idone: ex=0xffff80000027ab00 is done!
>ehci_idone: ex=0xffff80000027ab00 is done!
>
>--
>see ya,
>giovanni
--
see ya,
giovanni
