On Tuesday 01 July 2008, Stuart Henderson wrote:
> Almost no clues at all without DMESG... "no longer" - when did it
> last work? What has changed since then?
Last worked about 2:00 pm EDT yesterday. I updated cvs, built kernel,
rebooted and problems started. Built userland, no change.
The good news is that is working again after a cvs up and rebuild around
noon (EDT) today.
In case it serves any worthwhile purpose I will post the current dmesg:
=======================================================
# dmesg
OpenBSD 4.3-current (GENERIC) #19: Tue Jul 1 11:07:05 EDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.80
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 400388096 (381MB)
avail mem = 378699776 (361MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/27/03, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfc940 (62 entries)
bios0: vendor Intel Corp. version "LY84510A.86A.0043.P17.0306270645"
date 06/27/2003
bios0: Intel Corporation D845GLAD
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf48c0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb200! 0xcb800/0x1000 0xcc800/0x1800
0xce000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xf0000000, size 0x8000000
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 9
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 10
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
fxp0 at pci1 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: irq 7,
address 00:90:27:54:e7:e9
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
em0 at pci1 dev 2 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq
9, address 00:07:e9:01:67:1b
fxp1 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq
11, address 00:07:e9:93:2b:51
inphy1 at fxp1 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L020L1>
wd0: 16-sector PIO, LBA, 19595MB, 40132503 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 3
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 128MB DDR SDRAM non-parity PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ff6d netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
=======================================================
Thank you!
--
Chris
