$man fxp

timed out -> problem with network

from your post :
send_packet: Network is down

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Hari
Sent: Wednesday, July 23, 2008 9:33 AM
To: misc@openbsd.org
Subject: DHCP question

Hello. I just finished installing OpenBSD 4.3. The dhcp setup during
network configuration was fine, meaning, IP address was properly
assigned. I went ahead with the default values provided. However,
after rebooting post installation, I am getting the following messages
that seems to point to a network problem (and of course, no IP address
is assigned):

<messages>
fxp0: warning: SCB timed out (x 3)
fxp0: config command timeout
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 1
send_packet: Network is down
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
</messages>

Several `intervals` are tried.

Dump of some relevant(?) files:

#ifconfig
lo0: flags-8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33208
         groups: lo
         inet 127.0.0.1 netmask 0xff000000
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
fxp0: flags-8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33208
         lladdr 00:16:76:13:ad:54
         media: Ethernet autoselect (100baseTX full-duplex)
         status: active
         inet6 fe80::216::76ff::fe13::ad54%fxp0 prefixlen 64 tentative
scopeid 0x1
enc0: flags=0<> mtu 1536

#cat /etc/hosts:
::1 localhost.WORKGROUP locahost
127.0.0.1 localhost.WORKGROUP localhost
::1 mercury.WORKGROUP mercury
127.0.0.1 mercury.WORKGROUP mercury

#cat /etc/hostname.fxp0:
dhcp NONE NONE NONE

#cat /etc/resolv.conf
lookup file bind

# hostname
mercury.my.domain

#domainname

(none)

For my internet connection, I have a router that acts as a DHCP server
assigning IPs as 192.168.11.x. Why is the OpenBSD box not assigned an
IP by this router? Can anyone please let me know how I can get the
network up and running on the OpenBSD box?

Please let me know in case I have missed out on listing any config files.

Thanks.

Hari

Reply via email to