I have a box with a Qlogic 2200 attached to a compellent san. Bios on the
card is version 1.83. Works fine.
OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.19 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 3220639744 (3071MB)
avail mem = 3120861184 (2976MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/09/05, BIOS32 rev. 0 @ 0xfd7d1,
SMBIOS
rev. 2.3 @ 0xf5fff (45 entries)
bios0: vendor IBM version "-[T2E139AUS-1.15]-" date 06/09/2005
bios0: IBM eserver xSeries 335 -[8676G1X]-
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1600 0xc9600/0x800 0xc9e00/0x2800
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class)
cpu1: FPU,CX8,APIC,CNXT-ID,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 13 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 12 pa 0xfec02000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb2 bus 1
mpi0 at pci1 dev 1 function 0 "Symbios Logic 53c1030" rev 0x07: apic 13 int 6
(irq 9)
scsibus0 at mpi0: 16 targets
isp0 at pci1 dev 2 function 0 "QLogic ISP2200" rev 0x05: apic 13 int 2 (irq
9)
isp0: bad execution throttle of 0- using 16
scsibus1 at isp0: 256 targets
sd0 at scsibus1 targ 0 lun 0: SCSI2 0/direct fixed
sd0: 8192MB, 32000 cyl, 4 head, 131 sec, 512 bytes/sec, 16777216 sec total
vga1 at pci0 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM registered ECC PC2300CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 14
int 11 (irq 11), version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb3 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb4 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci2 at pchb4 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): apic 13 int 8 (irq 3), address 00:0d:60:d4:dc:3a
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): apic 13 int 9 (irq 5), address 00:0d:60:d4:dc:3b
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
_________________________________________________________________
Time for vacation? WIN what you need- enter now!
http://www.gowindowslive.com/summergiveaway/?ocid=tag_jlyhm
