Running on w2003 with command:
vboxheadless.exe -norawr0 -s obsd43
OpenBSD 4.3-stable (GENERIC) #1: Mon Aug 4 15:34:39 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,PGE,CMOV,CFLUSH,MMX,FXSR,SSE,SSE2,MWAIT
real mem = 536375296 (511MB)
avail mem = 510599168 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @
0xfad60, SMBIOS rev. 2.5 @ 0xe1000 (3 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
apm0 at bios0: Power Management spec V1.2
apm0: APM engage (device 1): unknown error code? (83)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb0a0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8e00 0xe2000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibil
ity
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 10240MB, 20971520 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <VBOX, CD-ROM, 1.0> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcn0 at pci0 dev 3 function 0 "AMD 79c970 PCnet-PCI" rev 0x40,
Am79c973, rev 0: irq 11, address 08:00:27:2e:ec:31
acphy0 at pcn0 phy 0: AC101 10/100 PHY, rev. 11
ifmedia_set: no match for 0x20/0xffffffff
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0
not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
biomask e7fd netmask effd ttymask ffff
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
$ uptime
10:47AM up 1 day, 17:49, 1 user, load averages: 0.08, 0.08, 0.08
2008/8/7 Tomas Bodzar <[EMAIL PROTECTED]>:
> 4.3 runs fine on many PCs in Qemu as I tested
> (Kubuntu,Mandriva,OpenSUSE,Windows).4.4 is Beta,so there may be problems.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jordi Beltran
> Creix
> Sent: Thursday, August 07, 2008 5:56 AM
> To: misc@openbsd.org
> Subject: Re: OpenBSD 4.3 running in VirtualBox? Anyone have it working
> properly?
>
> I tried to run a recent i386 4.4 beta on a KVM/QEMU virtual machine under
> Ubuntu and there are some problems with the emulated network.
> The driver constantly reports timeouts.
>> re0: watchdog timeout
> As a side effect the connection is very slow. I assume that doesn't happen on
> the actual hardware that QEMU is supposed to emulate, but other OSes don't
> have the same problem.
>
>
> 2008/8/7 Tomas Bodzar <[EMAIL PROTECTED]>:
>> VirtualBox sucks to version 1.6.2 .There is a 1.6.4 now,but I don't test it.
>> I use Qemu on BSD/Linux/Windows,it's better in my opinion.
>> (work with VirtualBox,Vmware Server 1.0.x,2.x,MS Virtual Server,MS
>> Virtual PC)
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
>> Of Richard Daemon
>> Sent: Thursday, August 07, 2008 3:31 AM
>> To: misc
>> Subject: OpenBSD 4.3 running in VirtualBox? Anyone have it working properly?
>>
>> OpenBSD 4.3 running in VirtualBox? Anyone have it working properly and if
>> so, how?
>>
>> Same problems as reported here: http://www.virtualbox.org/ticket/192
>>
>> Regards,
