The acpitz and lm readings look correct. But the kate isn't even close.
hw.sensors.acpitz0.temp0=31.05 degC (zone temperature)
hw.sensors.kate0.temp0=-1.25 degC
hw.sensors.kate0.temp1=-8.00 degC
hw.sensors.kate0.temp2=0.25 degC
hw.sensors.kate0.temp3=7.50 degC
hw.sensors.lm1.temp0=35.00 degC
hw.sensors.lm1.temp1=31.50 degC
hw.sensors.lm1.temp2=41.00 degC
OpenBSD 4.4 (GENERIC.MP) #1808: Wed Aug 6 00:19:35 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2132963328 (2034MB)
avail mem = 2071121920 (1975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (41 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 11/19/2007
bios0: Unknow Unknow
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) UAR1(S5)
USB0(S3) USB2(S3) AZAD(S5) MMAC(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 25000000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2612.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2612.04 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature 90 degC
acpibtn0 at acpi0: PWRB
cpu0: PowerNow! K8 2612 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA MCP65 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP65 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP65 SMBus" rev 0xa1
iic0 at nviic0
iic0: addr 0x2e 00=c1 01=0f 02=00 03=00 04=00 05=00 06=00 07=c0 08=14 09=62
10=02 11=00 12=00 words 00=c1ff 01=0fff 02=00ff 03=00ff 04=00ff 05=00ff
06=00ff 07=c0ff
iic0: addr 0x2f 00=00 01=0c 03=00 13=00 words 00=00ff 01=0cff 02=ffff 03=00ff
04=ffff 05=ffff 06=ffff 07=ffff
spdmem0 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
iic1 at nviic0
"NVIDIA MCP65 Memory" rev 0xa1 at pci0 dev 1 function 2 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA MCP65 USB" rev 0xa1: apic 2 int 10 (irq
10), version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA MCP65 USB" rev 0xa1: apic 2 int 11 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 8 function 0 "NVIDIA MCP65 PCI" rev 0xa1
pci1 at ppb0 bus 1
emu0 at pci1 dev 7 function 0 "Creative Labs SoundBlaster Audigy" rev 0x04:
apic 2 int 10 (irq 10)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Audigy Digital" rev 0x04 at pci1 dev 7 function 1
not configured
"Creative Labs Firewire" rev 0x04 at pci1 dev 7 function 2 not configured
pciide0 at pci0 dev 9 function 0 "NVIDIA MCP65 IDE" rev 0xa1: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW SHM-165P6S, MS0K> ATAPI 5/cdrom
removable
wd0 at pciide0 channel 0 drive 1: <ST380011A>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 10 function 0 "NVIDIA MCP65 SATA" rev 0xa1: DMA
pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <ST3250824AS>
wd1: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
wd2 at pciide1 channel 0 drive 1: <ST3500630AS>
wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd2(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ppb1 at pci0 dev 11 function 0 vendor "NVIDIA", unknown product 0x045b rev
0xa1
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x13, Yukon-2 EC
Ultra (0x3): apic 2 int 5 (irq 5)
msk0 at mskc0 port A: address 00:50:8d:9f:5b:64
eephy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
ppb2 at pci0 dev 12 function 0 "NVIDIA MCP65 PCIE" rev 0xa1
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA MCP65 PCIE" rev 0xa1
pci4 at ppb3 bus 4
vga1 at pci4 dev 0 function 0 "ATI Radeon X1950 Pro" rev 0x9a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
"ATI Radeon X1950 Pro Sec" rev 0x9a at pci4 dev 0 function 1 not configured
ppb4 at pci0 dev 14 function 0 "NVIDIA MCP65 PCIE" rev 0xa1
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
BH-G1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/11.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
