Hope someone knows how to address the following issue. I patched my 4.3
kernel with the 005_pcb patch, did the usual config/make depend/make steps
as clearly outlined in config(8). DMESG's follow.
After the new kernel starts rc, things go bad real fast. Plain
generic.mpand generic. Nothing was changed at all.
Good generic.mp kernel
login: >> OpenBSD/i386 BOOT 3.02
boot>
booting hd0a:/bsd: 5999364+1014172 [52+311824+292774]=0x744000
entry point at 0x200120
[ using 605024 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.3-current (GENERIC.MP) #673: Fri May 2 04:50:32 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 2145525760 (2046MB)
avail mem = 2066485248 (1970MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/15/06, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf0450 (97 entries)
bios0: vendor Dell Inc. version "A07" date 03/15/2006
bios0: Dell Inc. Precision WorkStation 470
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) PCI4(S5)
PCI5(S5) PCI6(S5) KBD_(S1) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec80800, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 10
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 1 (PCI1)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 4 (PCI4)
acpiprt4 at acpi0: bus 5 (PCI5)
acpiprt5 at acpi0: bus 6 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x1800! 0xcd800/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7525 Host" rev 0x09
"Intel E7520 Error Reporting" rev 0x09 at pci0 dev 0 function 1 not
configured
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x00
pci3 at ppb2 bus 3
ral0 at pci3 dev 13 function 0 "Ralink RT2560" rev 0x01: apic 10 int 1 (irq
10), address 00:0e:2e:52:03:65
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
em0 at pci3 dev 14 function 0 "Intel PRO/1000MT (82545GM)" rev 0x04: apic 10
int 0 (irq 11), address 00:14:22:26:1d:3b
ppb3 at pci0 dev 3 function 0 "Intel E7520 PCIE" rev 0x09: apic 8 int 16
(irq 11)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x09: apic 8 int 16
(irq 11)
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "NVIDIA Quadro FX 1400" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
18 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 8 int
23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci6 at ppb5 bus 6
re0 at pci6 dev 13 function 0 "US Robotics USR997902" rev 0x10: RTL8169S
(0x0400), apic 8 int 17 (irq 10), address 00:14:c1:32:4a:f4
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-H44L, SB00> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 18 (irq 9) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 8
int 17 (irq 10)
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6w201 rev 0xb1
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem2 at iic0 addr 0x55: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem3 at iic0 addr 0x56: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
setting tty flags
machdep.allowaperture: 0 -> 2
starting network
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.253
bound to 192.168.1.63 -- renewal in 21600 seconds.
starting system logger
starting initial daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Sun Sep 7 12:22:03 CDT 2008
bad mp kernel
>> OpenBSD/i386 BOOT 3.02
boot>
booting hd0a:/bsd: 5953236+1015020 [52+310016+290851]=0x73808c
entry point at 0x200120
[ using 601292 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.3 (GENERIC.MP) #0: Fri Sep 5 14:41:22 CDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 2145525760 (2046MB)
avail mem = 2066534400 (1970MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/15/06, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf0450 (97 entries)
bios0: vendor Dell Inc. version "A07" date 03/15/2006
bios0: Dell Inc. Precision WorkStation 470
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) PCI4(S5)
PCI5(S5) PCI6(S5) KBD_(S1) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec80800, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 10
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 1 (PCI1)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 4 (PCI4)
acpiprt4 at acpi0: bus 5 (PCI5)
acpiprt5 at acpi0: bus 6 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x1800! 0xcd800/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7525 Host" rev 0x09
"Intel E7520 Error Reporting" rev 0x09 at pci0 dev 0 function 1 not
configured
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x00
pci3 at ppb2 bus 3
ral0 at pci3 dev 13 function 0 "Ralink RT2560" rev 0x01: apic 10 int 1 (irq
10), address 00:0e:2e:52:03:65
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
em0 at pci3 dev 14 function 0 "Intel PRO/1000MT (82545GM)" rev 0x04: apic 10
int 0 (irq 11), address 00:14:22:26:1d:3b
ppb3 at pci0 dev 3 function 0 "Intel E7520 PCIE" rev 0x09: apic 8 int 16
(irq 11)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x09: apic 8 int 16
(irq 11)
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "NVIDIA Quadro FX 1400" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
18 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 8 int
16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 8 int
23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci6 at ppb5 bus 6
re0 at pci6 dev 13 function 0 "US Robotics USR997902" rev 0x10: RTL8169S
(0x0400), apic 8 int 17 (irq 10), address 00:14:c1:32:4a:f4
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-H44L, SB00> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 18 (irq 9) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 8
int 17 (irq 10)
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6w201 rev 0xb1
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem2 at iic0 addr 0x55: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
spdmem3 at iic0 addr 0x56: 512MB DDR2 SDRAM registered ECC PC2-3200CL3
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
Bad system call (core dumped)
Bad system call (core dumped)
setting tty flags
machdep.allowaperture: 0 -> 2
starting network
/etc/rc[264]: touch: not found
/etc/rc: /etc/netstart[297]: stat: not found
WARNING: /etc/hostname.em0 is insecure, fixing permissions
can't open and lock /var/db/dhclient.leases.em0: No such file or directory
exiting.
/etc/rc[294]: cd: /var/run - No such file or directory
/etc/rc[295]: cd: /var/authpf - No such file or directory
/etc/rc[298]: cannot create /var/run/dmesg.boot: No such file or directory
starting system logger
/etc/rc[311]: syslogd: not found
starting initial daemons:/etc/rc[401]: sed: not found
/etc/rc[401]: wc: not found
/etc/rc[401]: [: 0: unexpected operator/operand
.
Bad system call (core dumped)
checking quotas: done.
/etc/rc[450]: quotaon: not found
building ps databases: kvm/etc/rc[455]: kvm_mkdb: not found
dev/etc/rc[457]: dev_mkdb: not found
.
clearing /tmp
/etc/rc[475]: find: not found
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
/etc/rc[506]: mktemp: not found
creating runtime link editor directory cache.
ldconfig: /usr/lib: No such file or directory
ldconfig: /var/run/ld.so.hints.XSuaa30472: No such file or directory
starting network daemons: sendmail inetd/etc/rc[688]: inetd: not found
sshd/etc/rc[692]: /usr/sbin/sshd: not found
.
starting local daemons:.
standard daemons: cron/etc/rc[761]: cron: not found
.
Sun Sep 7 17:25:12 GMT 2008
starting xdm...
/etc/rc[777]: /usr/X11R6/bin/xdm: not found
So as you can see, something has happened, but to what exactly, I do not
know. If there is something that I may need to do, please advise.
