I'm experiencing some serious difficulties getting WPA2 working with my system. Situation is as follows:
Problem occurs with snapshots of October 1 and October 4. Have not tested with 4.3 because WPA support for iwi(4) is only in -current. Client is a ThinkPad T42 (dmesg below) with both iwi(4) and bwi(4) wireless NICs. I am running the latest firmware for both NICs, 3.0p0 for the iwi and 1.4 for the bwi. AP is a 2wire 3800HGV-B VDSL2 gateway device with integrated access point. There's a "data sheet" containing very little worthwhile information at http://www.2wire.com/pages/pdfs/5100-000383-000_2W_Rev_B_0107.pdf Unencrypted access and WPA/TKIP both work fine. With both iwi(4) and bwi(4) devices, WPA2/ccmp will connect and stay up for about a minute, generating lots of incoming errors. Sample 'netstat -i' output is below. After a minute or so, the interface dies and 'netstat -i' will hang until I 'ifconfig down' the interface. I have tried specifying values for wpaakms, wpaciphers, and wpaprotos in my hostname.if files, with the same results. Please let me know if I can provide any additional information. I upgrade to the latest snapshot every few days and will happily test any diffs. network config files: /etc/hostname.iwi0 inet 192.168.1.50 255.255.255.0 NONE nwid mynet wpa wpapsk \ 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef /etc/hostname.bwi0 inet 192.168.1.60 255.255.255.0 NONE nwid mynet wpa wpapsk \ 0xdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef netstat -i output showing ierrs on both wifi NICS: Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Colls lo0 33204 <Link> 0 0 0 0 0 lo0 33204 localhost.l localhost.local 0 0 0 0 0 lo0 33204 fe80::%lo0/ fe80::1%lo0 0 0 0 0 0 lo0 33204 127/8 localhost.local 0 0 0 0 0 em0 1500 <Link> 00:01:6c:ea:03:f8 289 0 104 0 0 em0 1500 fe80::%em0/ fe80::201:6cff:fe 289 0 104 0 0 em0 1500 192.168.1/2 192.168.1.40 289 0 104 0 0 iwi0* 1500 <Link> 00:13:ce:8b:79:ed 3 36 3 0 0 iwi0* 1500 192.168.1/2 192.168.1.50 3 36 3 0 0 iwi0* 1500 fe80::%iwi0 fe80::213:ceff:fe 3 36 3 0 0 enc0* 1536 <Link> 0 0 0 0 0 bwi0 1500 <Link> 00:13:10:3c:cc:2a 4 24 19 0 0 bwi0 1500 192.168.1/2 192.168.1.60 4 24 19 0 0 bwi0 1500 fe80::%bwi0 fe80::213:10ff:fe 4 24 19 0 0 pflog0 33204 <Link> 0 0 0 0 0 dmesg: OpenBSD 4.4-current (GENERIC) #1073: Fri Oct 3 22:04:40 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 real mem = 1609527296 (1534MB) avail mem = 1546838016 (1475MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/18/07, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries) bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007 bios0: IBM 2379RHU apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 100% apm0: AC on, battery charge high acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #6 is the last bus bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0 cpu0: Enhanced SpeedStep 1800 MHz (1340 mV): speeds: 1800, 1600, 1400, 1200, 1000, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd0000000, size 0x10000000 uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci2 at ppb1 bus 2 cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11 cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11 em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11, address 00:01:6c:ea:03:f8 iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq 11, address 00:13:ce:8b:79:ed cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.70> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask effd netmask effd ttymask ffff mtrr: Pentium Pro MTRR support bwi0 at cardbus0 dev 0 function 0 "Broadcom BCM4306" rev 0x03: irq 11, address 00:13:10:3c:cc:2a ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 softraid0 at root root on wd0a swap on wd0b dump on wd0b -- Joe Gidi [EMAIL PROTECTED]
