Hi,
one of our OpenBSD 4.2 HP ProLiant machines hanged up today repeating the
following messages:
sd0(ciss0:0:0): cannot allocate scsi xs
sd0: not queued, error 12
sd0(ciss0:0:0): cannot allocate scsi xs
sd0: not queued, error 12
sd0(ciss0:0:0): cannot allocate scsi xs
sd0: not queued, error 12
[...]
After a cold reboot all seems to be fine, again.
Any ideas what may cause this pain are welcome :)
-Florian
Kernel is GENERIC 4.2, recompiled with patches up to 014, dmesg below:
OpenBSD 4.2 (GENERIC) #3: Tue Aug 5 14:07:14 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073291264 (1023MB)
avail mem = 1030938624 (983MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (77 entries)
bios0: vendor HP version "P51" date 04/26/2006
bios0: HP ProLiant DL380 G4
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 3000.50 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xT
PR,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 3
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 5, address 00:18:fe:72:82:73
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 5, address 00:18:fe:72:82:72
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
ciss0 at pci3 dev 3 function 0 "Compaq Smart Array 64xx" rev 0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.76/2.76
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.76> SCSI3 0/direct
fixed
sd0: 69459MB, 8854 cyl, 255 head, 63 sec, 512 bytes/sec, 142253280 sec total
ppb3 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c
pci4 at ppb3 bus 5
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 6
em0 at pci5 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 5,
address 00:04:23:d6:cc:40
em1 at pci5 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 5,
address 00:04:23:d6:cc:41
ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 10
em2 at pci6 dev 1 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 5,
address 00:04:23:ce:cb:74
em3 at pci6 dev 1 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 5,
address 00:04:23:ce:cb:75
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 5
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x01 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci7 dev 4 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CD-ROM TS-L162C, N204> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
