It's the same problem i had with the IBM x3650:
"Adaptec ASR-2120S" rev 0x02 at pci11 dev 0 function 0 not configured
The driver is not enabled by default.
I established conversation with Adaptec, and i will post all of it
soon.
On Thu, Oct 23, 2008 at 06:24:27PM -0200, Ricardo Augusto de Souza wrote:
> Finally here is the dmesg
>
>
> OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,C
> X16,xTPR
> real mem = 3220541440 (3071MB)
> avail mem = 3122683904 (2978MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 02/08/08, BIOS32 rev. 0 @ 0xfd841,
> SMBIOS rev. 2.4 @
> 0xbffcee80 (86 entries)
> bios0: vendor IBM version "-[GFE136BUS-1.09]-" date 02/08/2008
> bios0: IBM IBM System x3550 -[7978B1U]-
> acpi0 at bios0: rev 2, can't enable ACPI
> bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x1800
> 0xce000/0x5000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE x8" rev 0x31
> pci1 at ppb0 bus 16
> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci2 at ppb1 bus 17
> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci3 at ppb2 bus 19
> ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci4 at ppb3 bus 18
> ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> pci5 at ppb4 bus 20
> ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
> pci6 at ppb5 bus 35
> ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x31
> pci7 at ppb6 bus 7
> ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
> pci8 at ppb7 bus 34
> ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
> pci9 at ppb8 bus 3
> ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci10 at ppb9 bus 4
> bnx0 at pci10 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 7
> ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
> pci11 at ppb10 bus 2
> "Adaptec ASR-2120S" rev 0x02 at pci11 dev 0 function 0 not configured
> "Intel 5000 DMA" rev 0x31 at pci0 dev 8 function 0 not configured
> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
> ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
> pci12 at ppb11 bus 5
> ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci13 at ppb12 bus 6
> bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 3
> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
> pci14 at ppb13 bus 1
> vga1 at pci14 dev 1 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
> channel 0 c onfigured to
> compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-T10N, 1.00> SCSI0
> 5/cdrom re movable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> "Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask ff65 netmask ffed ttymask ffef
> rd0: fixed, 3800 blocks
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x04b3 USB
> Optical M ouse" rev
> 2.00/2.00 addr 2
> uhidev0: iclass 3/1
> uhid at uhidev0 not configured
> uhidev1 at uhub1 port 2 configuration 1 interface 0 " USB Keyboard" rev
> 1.10/2.8 0 addr 3
> uhidev1: iclass 3/1
> ukbd0 at uhidev1
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub1 port 2 configuration 1 interface 1 " USB Keyboard" rev
> 1.10/2.8 0 addr 3
> uhidev2: iclass 3/0, 2 report ids
> uhid at uhidev2 reportid 1 not configured
> uhid at uhidev2 reportid 2 not configured
> root on rd0a swap on rd0b dump on rd0b
> bnx1: address 00:1a:64:79:f1:5a
> brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> bnx0: address 00:1a:64:79:f1:58
> brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
>
>
>
> -----Mensagem original-----
> De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de
> Ricardo Augusto de Souza
> Enviada em: quinta-feira, 23 de outubro de 2008 16:34
> Para: Marcin; [email protected]
> Assunto: RES: OpenBSD on IBM System X3550 7879
>
> What do u mean with mini menu after post?
> I created RAID using IBM ServerGuide 7.4.13
>
> I also tested with no RAID.. it also failed.
>
>
> -----Mensagem original-----
> De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de
> Marcin
> Enviada em: quinta-feira, 23 de outubro de 2008 15:50
> Para: [email protected]
> Assunto: Re: OpenBSD on IBM System X3550 7879
>
> 2008/10/23 John Nietzsche <[EMAIL PROTECTED]>:
> > I have tried on an IBM server, but could not get it working. If you
> > succed, let me know.
> >
> > I believe raid controller is not supported.
> >
>
> Hello,
>
> I'm not sure if this could be of any help, but I had very similar
> problems with installation of Linux, until I found out that you HAVE
> TO create raid array or the controller won't expose drives to the OS.
> I expected it to work in a kind of "pass-through" mode by default,
> when you can access drives from the OS, but this wasn't the case.
>
> So, please make sure you have created a RAID using mini menu after
> POST, before you start OpenBSD installation process
>
> Regards,
> --
> Marcin
