Hi
I follow my mail from september were I tried to install the soft raid on
OpenBSD 4.3. As we saw, this couldn't work.
I redone the procedure with the new released version, and it seems to be
better:
Extraction of dmesg:
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
raid0: Component /dev/wd0d being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 100 Mod Counter: 128
Clean: Yes Status: 0
raid0: Component /dev/wd1d being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 100 Mod Counter: 128
Clean: Yes Status: 0
raid0 at root
The last question I have is: it seems that I actually boot on wd0a, which is
not a RAID disk. How can I boot on raid0a ?
I made a test: creating a file after booting on hd0a, and this file doesn't
exist in hd1a.
The commands I done to build the raid:
raidctl -C /etc/raid0.conf raid0
raidctl -I 100 raid0
raidctl -iv raid0
disklabel -E raid0
newfs /dev/rraid0a
newfs /dev/rraid0d
mount /dev/raid0a /mnt
cd /mnt
dump -0f - / | restore -rf -
raidctl -A yes raid0
raidctl -A root raid0
echo /dev/raid0a / ffs rw 1 1 > /mnt/etc/fstab
echo /dev/raid0b none swap sw 0 0 >> /mnt/etc/fstab
echo /dev/raid0d /home ffs rw,nodev,nosuid,softdep 1 2 >> /mnt/etc/fstab
umount /mnt
Reboot
Thanks for the reply
Regards
