On 2008-11-11, Derek Buttineau <[EMAIL PROTECTED]> wrote: >> Run relayd -dv, try and reload the config, check the output and >> paste it in mail.
I should probably have also mentioned to mark the point where relayctl reload is run.. > > > I get the same thing as well when trying to reload via relayctl, says > "command failed". > > I am still also unable to get transparent relaying working. I assume > that though is more me missing something from my configuration (see my > post subject "Transparent Reverse Proxy with relayd" for the config). > > Here's my output from relayd -dv > >========================= > > startup > relay_privinit: adding relay pop3 > protocol 1: name tcp_service > flags: 0x0004 > type: tcp > relay_privinit: adding relay pop3s > protocol 1: name tcp_service > flags: 0x0004 > type: tcp > relay_privinit: adding relay imap > protocol 1: name tcp_service > flags: 0x0004 > type: tcp > relay_privinit: adding relay imaps > protocol 1: name tcp_service > flags: 0x0004 > type: tcp > relay_privinit: adding relay maildelivery > protocol 1: name tcp_service > flags: 0x0004 > type: tcp > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > relay_init: max open files 1024 > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:25 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > relay_launch: running relay pop3 > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > relay_launch: running relay pop3s > host 10.10.19.4, check tcp (6ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > host 10.10.19.5, check tcp (6ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > host 10.10.19.4, check tcp (6ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > host 10.10.19.5, check tcp (6ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > host 10.10.19.4, check tcp (7ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > host 10.10.19.5, check tcp (7ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > host 10.10.19.4, check tcp (7ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > host 10.10.19.5, check tcp (7ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > host 10.10.19.4, check tcp (7ms), state unknown -> up, availability > 100.00% > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > host 10.10.19.5, check tcp (7ms), state unknown -> up, availability > 100.00% > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > adding 2 hosts from table pop3_servers:25 > relay_launch: running relay maildelivery > adding 2 hosts from table pop3_servers:25 > relay_launch: running relay imap > adding 2 hosts from table pop3_servers:110 > init_filter: filter init done > init_tables: created 0 tables > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > relay_launch: running relay imaps > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > relay_launch: running relay maildelivery > relay_init: max open files 1024 > adding 2 hosts from table pop3_servers:110 > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > relay_init: max open files 1024 > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > relay_launch: running relay pop3 > adding 2 hosts from table pop3_servers:110 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > adding 2 hosts from table pop3_servers:995 > adding 2 hosts from table pop3_servers:143 > adding 2 hosts from table pop3_servers:993 > adding 2 hosts from table pop3_servers:25 > relay_launch: running relay pop3 > relay_launch: running relay pop3s > relay_launch: running relay imap > relay_launch: running relay imaps > relay_launch: running relay maildelivery > pfe_dispatch_imsg: state 1 for host 1 10.10.19.4 > pfe_dispatch_imsg: state 1 for host 2 10.10.19.5 > pfe_dispatch_imsg: state 1 for host 3 10.10.19.4 > pfe_dispatch_imsg: state 1 for host 4 10.10.19.5 > pfe_dispatch_imsg: state 1 for host 5 10.10.19.4 > pfe_dispatch_imsg: state 1 for host 6 10.10.19.5 > pfe_dispatch_imsg: state 1 for host 7 10.10.19.4 > pfe_dispatch_imsg: state 1 for host 8 10.10.19.5 > pfe_dispatch_imsg: state 1 for host 9 10.10.19.4 > pfe_dispatch_imsg: state 1 for host 10 10.10.19.5 > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.5 (tcp_host_up: connect successful) > hce_notify_done: 10.10.19.4 (tcp_host_up: connect successful) > ^Chost check engine exiting > kill_tables: deleted 0 tables > flush_rulesets: flushed rules > pf update engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > socket relay engine exiting > >===================================== > > Thanks, > > Derek
