after a new install of 4.4 and while i restored my apps, i get an
expected crash

ddb> trace
Debugger(14,6,d98d8e5c,d0dbfd00,d26) at Debugger+0x4
panic(d06f90c0,d06c121d,d0712040,d07138a0,23d) at panic+0x55
tablefull(d06c121d,d07138a0,23d,d0712040,d0201f42) at tablefull
uvm_aiodone_daemon(d085c7e8,fe5,d98d8f6c,d0478579) at
uvm_aiodone_daemon+0x2e5
uvm_aiodone_daemon(d98d7000,6b67,191b5,d67c8004,d0477a48) at
uvm_aiodone_daemon
+0x9fd
uvm_pageout(d67c8004) at uvm_pageout+0xd5
Bad frame pointer: 0xd098ceb8

see dmesg below. other informations on demand (ps, show registers, show
all pools)
also i have asked "boot dump", i have nothing in /var/crash, so no dump.
Except previous command, is there anything else than ps & trace which
could be useful to report ?

thanks
Regards



[ using 622804 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 4.4 (GENERIC) #0: Sun Nov  9 16:44:46 CET 2008
    [EMAIL PROTECTED]:/share2/ob/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 351 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 435761152 (415MB)
avail mem = 412725248 (393MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/03/00, BIOS32 rev. 0 @ 0xf0520
apm0 at bios0: Power Management spec V1.2 (BIOS management disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd92
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0d10/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xcc000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6326 VGA" rev 0x0b
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xe4000000, size 0x4000000
drm at vga1 unsupported
piixpcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL EX6.4A>
wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8322B, 1.10> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 5
piixpm0 at pci0 dev 4 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
lm1 at iic0 addr 0x2d: W83781D
spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL3
spdmem2 at iic0 addr 0x52: 32MB SDRAM non-parity PC66CL2
emu0 at pci0 dev 9 function 0 "Creative Labs SoundBlaster Live" rev
0x07: irq 5
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci0 dev 9 function 1
not configured
xl0 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 12,
address 00:04:76:24:cd:fa
exphy0 at xl0 phy 24: 3Com internal media interface
uhci1 at pci0 dev 11 function 0 "VIA VT83C572 USB" rev 0x61: irq 10
uhci2 at pci0 dev 11 function 1 "VIA VT83C572 USB" rev 0x61: irq 12
ehci0 at pci0 dev 11 function 2 "VIA VT6202 USB" rev 0x63: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
"VIA VT6306 FireWire" rev 0x46 at pci0 dev 11 function 3 not configured
pciide1 at pci0 dev 12 function 0 "Promise PDC20262" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd1 at pciide1 channel 0 drive 0: <ST3120026A>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide1: channel 1 disabled (no drives)
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83781D
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
biomask ff65 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
uhub4 at uhub1 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
uplcom0 at uhub4 port 1 "Prolific Technology Inc. USB-Serial Controller"
rev 1.10/3.00 addr 3
ucom0 at uplcom0
uplcom1 at uhub4 port 2 "Prolific Technology Inc. USB-Serial Controller"
rev 1.10/3.00 addr 4
ucom1 at uplcom1
uplcom2 at uhub4 port 3 "Prolific Technology Inc. USB-Serial Controller"
rev 1.10/3.00 addr 5
ucom2 at uplcom2
uplcom3 at uhub4 port 4 "Prolific Technology Inc. USB-Serial Controller"
rev 1.10/3.00 addr 6
ucom3 at uplcom3
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Reply via email to